M48T08

Features: `INTEGRATED ULTRA LOW POWER SRAM, REAL TIME CLOCK, POWER-FAIL CONTROL CIRCUIT and BATTERY`BYTEWIDEä RAM-LIKE CLOCK ACCESS`BCD CODED YEAR, MONTH, DAY, DATE, HOURS, MINUTES and SECONDS`TYPICAL CLOCK ACCURACY of ± 1 MINUTE a MONTH, at 25°C`AUTOMATIC POWER-FAIL CHIP DESELECT and WRITE P...

product image

M48T08 Picture
SeekIC No. : 004405349 Detail

M48T08: Features: `INTEGRATED ULTRA LOW POWER SRAM, REAL TIME CLOCK, POWER-FAIL CONTROL CIRCUIT and BATTERY`BYTEWIDEä RAM-LIKE CLOCK ACCESS`BCD CODED YEAR, MONTH, DAY, DATE, HOURS, MINUTES and SECONDS`...

floor Price/Ceiling Price

Part Number:
M48T08
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/4

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

`INTEGRATED ULTRA LOW POWER SRAM, REAL TIME CLOCK, POWER-FAIL CONTROL CIRCUIT and BATTERY
`BYTEWIDEä RAM-LIKE CLOCK ACCESS
`BCD CODED YEAR, MONTH, DAY, DATE, HOURS, MINUTES and SECONDS
`TYPICAL CLOCK ACCURACY of ± 1 MINUTE a MONTH, at 25°C
`AUTOMATIC POWER-FAIL CHIP DESELECT and WRITE PROTECTION WRITE PROTECT VOLTAGES (VPFD = Power-fail Deselect Voltage):
   M48T08: 4.5V VPFD 4.75V
   M48T18: 4.2V VPFD   4.5V
`SOFTWARE CONTROLLED CLOCK CALIBRATION for HIGH ACCURACY APPLICATIONS
`SELF-CONTAINED BATTERY and CRYSTAL in the CAPHAT DIP PACKAGE
`PACKAGING INCLUDES a 28-LEAD SOIC and SNAPHAT® TOP (to be Ordered Separately)
`SOIC PACKAGE PROVIDES DIRECT
   CONNECTION for a SNAPHAT TOP which
   CONTAINS the BATTERY and CRYSTAL
`PIN and FUNCTION COMPATIBLE with DS1643 and JEDEC STANDARD 8K x 8 SRAMs



Pinout

  Connection Diagram


Specifications

Symbol Parameter
Value
Unit
TA Ambient Operating Temperature
0 to 70
TSTG Storage Temperature (VCC Off, Oscillator Off)
40 to 85
TSLD (2) Lead Solder Temperature for 10 seconds
260
VIO Input or Output Voltages
0.3 to 7
V
VCC Supply Voltage
0.3 to 7
V
IO Output Current
20
mA
PD Power Dissipation
1
W

Notes: 1. Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to the absolute maximum rating conditions for extended periods of time may affect reliability.
2. Soldering temperature not to exceed 260°C for 10 seconds (total thermal budget not to exceed 150°C for longer than 30 seconds).
CAUTION: Negative undershoots below 0.3 volts are not allowed on any pin while in the Battery Back-up mode.
CAUTION: Do NOT wave solder SOIC to avoid damaging SNAPHAT sockets.



Description

The M48T08/18 TIMEKEEPER® RAM is an 8K x 8 non-volatile static RAM and real time clock which is pin and functional compatible with the DS1643.  The monolithic chip is available in two special packages to provide a highly integrated battery backed-up memory and real time clock solution.

The M48T08/18 is a non-volatile pin and function equivalent to any JEDEC standard 8K x 8 SRAM. It also easily fits into many ROM, EPROM, and EEPROM sockets, providing the non-volatility of PROMs without any requirement for special write timing or limitations on the number of writes that can be performed.

The 28 pin 600mil DIP CAPHAT™ houses the M48T08/18 silicon with a quartz crystal and a long life lithium button cell in a single package.

The 28 pin 330mil SOIC provides sockets with gold plated contacts at both ends for direct connection to a separate SNAPHAT housing containing the battery and crystal. The unique design allows the SNAPHAT battery package to be mounted on top of the SOIC package after the completion of the surface mount process. Insertion of the SNAPHAT housing after reflow prevents potential battery and crystal damage due to the high temperatures required for device surface-mounting. The SNAPHAT housing is keyed to prevent reverse insertion.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Sensors, Transducers
Prototyping Products
DE1
Crystals and Oscillators
Circuit Protection
View more