Features: · Two Wire SMBus Serial Interface· 2.7V to 3.6V Single Supply Voltage· Hardware Write Control· BYTE and PAGE WRITE (up to 16 Bytes)· RANDOM and SEQUENTIAL READ Modes· Self-Timed Programming Cycle· Automatic Address Incrementing· Enhanced ESD/Latch-Up Behavior· More than 1 Million Erase/W...
M34A02: Features: · Two Wire SMBus Serial Interface· 2.7V to 3.6V Single Supply Voltage· Hardware Write Control· BYTE and PAGE WRITE (up to 16 Bytes)· RANDOM and SEQUENTIAL READ Modes· Self-Timed Programmin...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol |
Parameter |
Value |
Unit | |
TA | Ambient Operating Temperature | -40 to 125 | ||
TSTG | Storage Temperature | -65 to 150 | ||
TLEAD | Lead Temperature during Soldering |
SO8: 20 seconds (max) 2 |
235 235 |
|
TSSOP8: 20 seconds (max) 2 | ||||
VIO | Input or Output range |
-0.6 to 6.5 |
V | |
VCC | Supply Voltage |
-0.3 to 6.5 |
V | |
VED | Electrostatic Discharge Voltage(Human Body model) 3 |
4000 |
V |
These electrically erasable programmable memory (EEPROM) devices are organized as 256x8 bits, and operate down to 2.7 V.
M34A02 is available in Plastic Small Outline and Thin Shrink Small Outline packages.
M34A02 is written by the ACR card-issuer, and then accessed in Read mode in the application, using the ACR Serial Bus protocol. This is a two wire serial interface that uses a bidirectional data bus and serial clock. The M34A02 carries a built-in 4-bit Device Type Identifier code (1011).
The M34A02 behaves as a slave in the ACR Serial Bus protocol, with all memory operations synchronized by the serial clock. Read and Write operations of M34A02 are initiated by a Start condition, generated by the bus master. The Start condition