Features: `LOWON RESISTANCE 75 W TYP AT VDD = 12 V ` BUILT-IN LATCHED INPUTS `LARGE ANALOG SIGNAL CAPACITY ± VDD/2`10 MHz SWITCH BANDWITH`MATCHED SWITCH CHARACTERISTICS` RON = 8 TYP, AT VDD = 12 V HIGH LINEARITY 0.25% DISTORTION TYP,AT f = 1 kHz, VIN = 5 V, VDD - VSS = 10 V AND RI = 1 `STANDAR...
M22102: Features: `LOWON RESISTANCE 75 W TYP AT VDD = 12 V ` BUILT-IN LATCHED INPUTS `LARGE ANALOG SIGNAL CAPACITY ± VDD/2`10 MHz SWITCH BANDWITH`MATCHED SWITCH CHARACTERISTICS` RON = 8 TYP, AT VDD = 12 ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol |
Parameter |
Value |
Unit | |
VDD * | Supply Voltage: | Ceramic Types |
-0.5 to +20 -0.5 to +18 |
V |
Plastic Types |
V | |||
Vi | Input Voltage |
-0.5 to VDD + 0.5 |
V | |
II | DC Input Current (any one input) |
± 10 |
mA | |
Ptot | Total Power Dissipation (per package) Dissipation per Output Transistor for Top = Full Package Temperature Range |
200 100 |
mW mW | |
Top | Operating Temperature: | Ceramic Types |
-55 to +125 -40 to +85 |
|
Plastic Types |
| |||
Tstg | Storage Temperature |
-65 to +150 |
|
Stressesabove those listedunder "Absolute Maximum Ratings"may cause permanent damage to thedevice. This isa stress ratingonly and functional operation of the device at these or any other conditions above those indicated in theoperational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability.
TheM22101 and M22102 crosspoint switches consist of 4 x 4 x 2 arrays of crosspoints (transmission gates), 4-line to 16-line decoders, and 16 latch circuits. Any one of the sixteen crosspoint pairs can be selected by applying the appropriate four-line addressand any number ofcrosspoint pairscanbeON simultaneously. Corresponding crosspoints in each array are turned on and OFF simultaneously, also.
In the M22101, the selected crosspoint pair M22102 can be turned on or off by applying a logical ONEor ZERO, respectively, to the data input, and applying a ONE to the strobe input. When the device is "power-up", the state of the 16 switches is indeterminate.