Features: · Compatible with I2C Extended Addressing· Two Wire I2C Serial Interface Supports 400 kHz Protocol· Single Supply Voltage (2.5 V to 5.5 V)· Hardware Write Control· BYTE and PAGE WRITE (up to 32 Bytes)· BYTE, RANDOM and SEQUENTIAL READ Modes· Self-Timed Programming Cycle· Automatic Addres...
M14C64: Features: · Compatible with I2C Extended Addressing· Two Wire I2C Serial Interface Supports 400 kHz Protocol· Single Supply Voltage (2.5 V to 5.5 V)· Hardware Write Control· BYTE and PAGE WRITE (up ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol |
Parameter |
Value |
Unit | |
TA | Ambient Operating Temperature |
0 to 70 |
| |
TSTG | Storage Temperature | Wafer form | -65 to 150 |
|
Module form |
-40 to 120 | |||
VIO | Input or Output range |
-0.6 to 6.5 |
V | |
VCC | Supply Voltage |
-0.3 to 6.5 |
V | |
VESD | Electrostatic Discharge Voltage (Human Body model) 2 |
4000 |
V | |
Electrostatic Discharge Voltage (Machine model) 3 |
400 |
V |
Note: 1. Except for the rating "Operating Temperature Range", stresses above those listed in the Table "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and operation of the device at these or any other conditions above those indicated in the Operating sections of this specification is not implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect device reliability. Refer also to the ST SURE Program and other relevant quality documents.
2. MIL-STD-883C, 3015.7 (100 pF, 1500 )
3. EIAJ IC-121 (Condition C) (200 pF, 0 )
Each device M14C64 is an electrically erasable programmable memory (EEPROM) fabricated with STMicroelectronics's High Endurance, Single Polysilicon, CMOS technology. This guarantees an endurance typically well above one million Erase/Write cycles, with a data retention of 40 years. The memory operates with a power supply as low as 2.5 V.
The M14C32 is available in wafer form (either sawn or unsawn) and in micromodule form (on film). The M14C64 is available in micro-module