LX8610-xx

Input Voltage (V_IN) .....................................................................................................6.5V
Enable Pin ..............................................................................................-0.3V to V_IN+0.3V
Operating Junction Temperature Plastic (ST & DM) Packages .................................125°C
Storage Temperature ............................................................................. -65°C to 150°C
Lead Temperature (Soldering, 10 Seconds) ............................................................300°C
Note: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground. Currents are positive into, negative out of specified terminal.

The LX8610 family are positive very low dropout regulators. They are designed to provide a power supply for very low headroom applications, such as 3.3V 2.5V.BiCMOS technology allows an effective series pass element resistance, R _DS(ON) of 250m dropout voltage of 250mV at 1A.

Low Quiescent Current and Logic- Controlled Shutdown help conserve battery life and increase system efficiency. Typical quiescent current is under 400A irrespective of load current, while the shutdown current is only 10A. The device will enter shutdown mode when the ENABLE pin is pulled low.Thermal & Short-Circuit Current Limiting: the LX8610 limits the current when the output is shorted, so protecting sensitive load circuits. The device will also turn off if the junction temperature exceeds 155°C.

Available in small outline SOT-223  and 8-pin SOIC: Adjustable versions use the 8-pin SOIC and fixed output voltage devices are supplied in the 3-lead SOT-223.