LTV-703V

Features:

High collector-emitter voltage(VCEO=70V)
High input-output isolation voltage:(VISO : 5,000Vrms)
Directly connectable to TTL
UL approved (No. E113898)
TUV approved (No.R9653630)
CSA approved (No. CA91533-1)
FIMKO approved (No. 193422)
NEMKO approved (No. P96103013)
DEMKO approved (No. 303968)
SEMKO approved (No. 9646047/01-30)
VDE approved (No. 094722)
Options available :
  -Leads with 0.4"(10.16mm)spacing (M Type)
  -Leads bends for surface mounting(S Type)
  -Tape and Reel of Type I for SMD(Add"-TA"Suffix)
  -Tape and Reel of Type II for SMD(Add"-TA1"Suffix)
  -VDE 0884 approvals (Add"-V"Suffix)


Application

 Telephone sets, telephone exchangers.
System appliances, measuring instruments.
 Signal transmission between circuits of different potentialsand impedances.


Specifications

Parameter		Symbol	Rating	Unit
Input	Forward Current	IF	50	mA
	Reverse Voltage	VR	6	V
	Power Dissipation	P	70	mA
Output	Collector-Emitter Voltage	VCEO	70	V
	Emitter-Collector Voltage	VECO	6	V
	Collector Current	IC	50	mA
	Collector Power Dissipation	PC	160	mA
	Collector-Base Voltage	VCBO	70	V
	Emitter-Base Voltage	VCBO	6	V
Total Power Dissipation		Ptot	200	mA
Operating Temperature		Topr	-30-100
Storage Temperature		Tstg	-55-125
*1.Isolation Voltage		Viso	5	KVrms
*2.Soldering Temperature		Tsol	260

*1. AC for 1 minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1)Short between anode and cathode on the primary side and between
collector, emitter and base on the secondary side.
(2)The isolation voltage tester with zero-cross circuit shall be used.
(3)The waveform of applied volttage shall be a sine wave.
*2. For 10 seconds.