Features: Simple Conversion of 5V to 5V SupplyOutput Drive: 100mAROUT: 6.5 (0.65V Loss at 100mA)BOOST Pin (Pin 1) for Higher Switching FrequencyInverting and Doubling ModesMinimum Open Circuit Voltage Conversion Efficiency: 99%Typical Power Conversion Efficiency with a 100mA Load: 88%Easy to UseAp...
LTC660: Features: Simple Conversion of 5V to 5V SupplyOutput Drive: 100mAROUT: 6.5 (0.65V Loss at 100mA)BOOST Pin (Pin 1) for Higher Switching FrequencyInverting and Doubling ModesMinimum Open Circuit Volta...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The LTC®660 is a monolithic CMOS switched-capacitor voltage converter. It performs supply voltage conversion from positive to negative from an input range of 1.5V to 5.5V, resulting in complementary output voltages of 1.5V to 5.5V. It also performs a doubling at an input voltage range of 2.5V to 5.5V, resulting in a doubled output voltage of 5V to 11V. Only two external capacitors are needed for the charge pump and charge reservoir functions.
The converter of LTC660 has an internal oscillator that can be overdriven by an external clock or slowed down when connected to a capacitor. The oscillator runs at a 10kHz frequency when unloaded. A higher frequency outside the audio band can also be obtained if the BOOST pin is tied to V +.
The LTC660 contains an internal oscillator, divide-by-two, voltage level shifter and four power MOSFETs.