Features: · Level Translates 1V Signals to Standard 3.3V and 5V Logic Rails· Allows Bus Pull-Up Voltages as Low as 1V on SDAIN and SCLIN· Bidirectional Buffer* for SDA and SCL Lines Increases Fanout· Prevents SDA and SCL Corruption During Live Board Insertion and Removal from Backplane· Isolates I...
LTC4301L: Features: · Level Translates 1V Signals to Standard 3.3V and 5V Logic Rails· Allows Bus Pull-Up Voltages as Low as 1V on SDAIN and SCLIN· Bidirectional Buffer* for SDA and SCL Lines Increases Fanout...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The LTC®4301L hot swappable, 2-wire bus buffer allows I/O card insertion into a live backplane without corruption of the data and clock busses. In addition, the LTC4301L SDAIN and SCLIN pins are compatible with systems with pull-up voltages as low as 1V. Control circuitry prevents the backplane from being connected to the card until a stop bit or a bus idle is present. When the connection is made, the LTC4301L provides bidirectional buffering, keeping the backplane and card capacitances isolated.
When driven low, the CS input pin of LTC4301L allows the part to connect after a stop bit or bus idle occurs. Driving CS high breaks the connection between SCLIN and SCLOUT and between SDAIN and SDAOUT. A logic high on READY indicates that the backplane and card sides are connected together.
The LTC4301L is offered in 8-pin DFN (3mm × 3mm) and MSOP packages.