LTC3541-2

The LTC®3541-2 combines a synchronous buck DC/ DC converter with a very low dropout linear regulator (VLDOTM regulator) and internal feedback resistor networks to provide two output voltages from a single input voltage with minimal external components. When configured for dual output operation, the LTC3541-2's auto start-up feature will bring the 1.875V buck output into regulation in a controlled manner, prior to enabling the 1.5V VLDO output without the need for external pin control. The 1.5V VLDO/linear regulator output prior to 1.875V buck output sequencing may also be obtained via external pin control. The input voltage range is ideally suited for Li-Ion battery applications powering sub-3.3V logic from 5V or 3.3V rails.

The synchronous buck converter of LTC3541-2 provides a high efficiency output, typically 90%. It can provide up to 500mA of output current while switching at 2.25MHz, allowing the use of small surface mount inductors and capacitors. A modeselect pin allows Burst Mode operation to be enabled for higher efficiency at light load currents, or disabled for lower noise, constant frequency operation.

The VLDO regulator of LTC3541-2 provides a low noise, low voltage output capable of providing up to 300mA of output current using only a 2.2F ceramic capacitor. The input supply voltage of the VLDO regulator (LV_IN) may come from the buck regulator output or a separate supply.