Features: · 200mV Max Dropout at 10mA Output Current· 4mA Typical Quiescent Current· 0.15% Max Initial Accuracy· No Output Capacitor Required· Output Sources 10mA, Sinks 2mA·40ppm/°C Max Drift· Voltage Options: 2.5V, 3V, 4.1V, 5V and AdjustableApplication· Battery-Powered Systems· Handheld Instrum...
LTC1798: Features: · 200mV Max Dropout at 10mA Output Current· 4mA Typical Quiescent Current· 0.15% Max Initial Accuracy· No Output Capacitor Required· Output Sources 10mA, Sinks 2mA·40ppm/°C Max Drift· Volt...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
· 200mV Max Dropout at 10mA Output Current
· 4mA Typical Quiescent Current
· 0.15% Max Initial Accuracy
· No Output Capacitor Required
· Output Sources 10mA, Sinks 2mA
·40ppm/°C Max Drift
· Voltage Options: 2.5V, 3V, 4.1V, 5V and Adjustable
· Battery-Powered Systems
· Handheld Instruments
· Precision Power Supplies
· A/D and D/A Converters
Supply Voltage .............................................................. 13V
Input Voltages .............................................. 0.3v to 13V
Output Voltages ............................................ 0.3V to 13V
Output Short-Circuit Duration .............................. Indefinite
Operating Temperature Range
(Note 2) ................................................ 40°C to 100°C
Specified Temperature Range ....................... 0°C to 70°C
Storage Temperature Range (Note 3) ... 65°C to 150°C
Lead Temperature (Soldering, 10 sec)..................... 300°C
The LTC®1798/LTC1798-2.5/LTC1798-3/LTC1798-4.1/ LTC1798-5 are micropower bandgap references that combine high accuracy and low drift with very low supply current and small package size. The combination of ultralow quiescent current and low dropout voltage of only 200mV (max) makes them ideal for battery-powered equipment. The output voltage is set by an external resistor divider for the adjustable LTC1798.
This series of references uses curvature compensation to obtain low temperature coefficient and trimmed thin-film resistors to achieve high output accuracy. These references can source up to 10mA and sink up to 2mA, making them ideal for precision regulator applications. They are stable without an output bypass capacitor, but are also stable with capacitance up to 1F. This feature is important in critical applications where PC board space is a premium and fast settling is demanded.
The LTC1798 series references provided power dissipation advantages over shunt references. In addition to supply current, shunt references must also idle the entire load current to operate.
The LTC1798 series is available in the SO-8 package.