Features: Complete Pulse Charger for 1-Cell Lithium-Ion Batteries1% Float Voltage AccuracyEnd-of-Charge (C/10) Detection OutputProgrammable Charge Termination TimerInternal 0.35W NMOS SwitchNo Blocking Diode RequiredSense Resistor Limits Maximum Current for SafetySEL Pin to Set Either 4.1V or 4.2V...
LTC17304: Features: Complete Pulse Charger for 1-Cell Lithium-Ion Batteries1% Float Voltage AccuracyEnd-of-Charge (C/10) Detection OutputProgrammable Charge Termination TimerInternal 0.35W NMOS SwitchNo Block...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The LTC®1730 is a complete pulse charger for 1-cell lithium-ion batteries. During pulse charging, the internal MOSFET switch is either fully on or off, virtually eliminating heat generation in the charger.
As the battery becomes charged and approaches the programmed voltage, the internal MOSFET begins to pulse on and off until the programmable timer expires. The end-of-charge condition is indicated at the CHRG pin when the average charge current falls to C/10. Removing the input voltage puts the LTC1730 into a sleep mode, dropping the battery current drain to less than 1mA (maximum).
An external sense resistor limits the maximum charge current as a safety precaution against a user connecting a wall adapter with the incorrect or no current limit. The internal MOSFET prevents reverse battery current from flowing if the input voltage is shorted to ground, eliminating the need for a blocking diode.
The LTC1730-4 is available in the 16-pin SSOP package and the LTC1730-4.2 is available in the 8-pin SO package.