Features: `Two 0.4/300mA N-Channel Switches` Available in MS8 and SO-8 Packages` SMBus and I2C Compatible`0.6V VIL and 1.4V VIH for DATA and CLK` Low Standby Current: 14A` Separate Drain Connection to SW0` Three Addresses from One Three-State Address Pin` Independent Control of Up to Six Switches`...
LTC1710: Features: `Two 0.4/300mA N-Channel Switches` Available in MS8 and SO-8 Packages` SMBus and I2C Compatible`0.6V VIL and 1.4V VIH for DATA and CLK` Low Standby Current: 14A` Separate Drain Connection ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The LTC®1710 SMBus dual switch has two built-in 0.4/ 300mA switches that are controlled by a 2-wire SMBus interface. With a low standby current of 14A (3.3V), the LTC1710 operates over an input voltage range of 2.7V to 5.5V while maintaining the SMBus specified 0.6V VIL and 1.4V VIH input thresholds.
Using the 2-wire interface, CLK and DATA, the LTC1710 follows SMBus's Send Byte Protocol to independently control the two 0.4 internal N-channel power switches, which are fully enhanced by onboard charge pumps.
The LTC1710 has one three-state programmable address pin that allows three different addresses for a total of six available switches on the same bus. The LTC1710 also features a separate user-controlled drain supply (SW0D) to Switch 0 so that it can be used to control SMBus peripherials using a different power supply.