Features: Precision Full-Scale DAC Output Current at 25°C: 50mA ±3%Wide Output Voltage DC Compliance: 2V to 10VWide Supply Range: 3V £ VCC £ 6.5V Supply Current in Shutdown: 0.2mALow Supply Current: 130mA Available in 8-Pin SO Triple ModeTM Interface1. Standard 3-Wire Mode2. 1-Wire Pul...
LTC1428-50: Features: Precision Full-Scale DAC Output Current at 25°C: 50mA ±3%Wide Output Voltage DC Compliance: 2V to 10VWide Supply Range: 3V £ VCC £ 6.5V Supply Current in Shutdown: 0.2mALow Sup...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Supply Voltage (VCC) ................................................ 7V
Input Voltage (All Inputs)........... 0.3V to (VCC + 0.3V)
Output Voltage
IOUT ...................................................... 0.3V to 10V
DOUT ....................................... 0.3V to (VCC + 0.3V)
Short-Circuit Duration (All Outputs) ............... Indefinite
Operating Temperature Range ................ 0°C to 70°C
Storage Temperature Range ............ 65°C to 150°C
Lead Temperature (Soldering, 10 sec)................ 300°C
DescriptionThe LTC®1428-50 is a micropower 8-bit current sink output D/A converter (DAC) with an output range of 0mA to 50mA. In 3.3V or 5V systems, the DAC IOUT pin can be biased from 2V to 10V. Supply current is only 130mA. Shutdown mode drops the supply current to 0.2mA.
The LTC1428-50 communicates with external circuitry by using one of three interface modes: standard 3-wire serial mode or one of two pulse modes. Upon power-up, the internal counter resets to 10000000B, the DAC output assumes midrange and the chip configures to 3-wire or pulse mode depending on the CS signal level. In 3-wire mode, the system MPU can serially transfer 8-bit data to and from the LTC1428-50.
In pulse mode, the upper six bits of the DAC output program for incrementonly (1-wire interface) or increment/decrement (2-wire interface) operation depending on the DIN signal level. In increment-only mode, the counter rolls over and sets the DAC to zero if the counter increases beyond full scale. In increment/decrement mode, the counter stops incrementing at full scale, stops decrementing at zero scale and does not roll over. LTC1428-50 is available in an 8-pin SO package.