LT6211

Features:

 Programmable Supply Current and Bandwidth:
    10MHz at 300mA per Amplifier up to
    200MHz at 6mA per Amplifier
Rail-to-Rail Output: 0.05V to 2.85V on 3V Single Supply
 High Slew Rate: 700V/ms
 High Output Drive:±75mA Minimum Output Current
C-LoadTM Op Amp Drives All Capacitive Loads
 Low Distortion:
       70dB HD2 at 1MHz 2VP-P
        75dB HD3 at 1MHz 2VP-P
Fast Settling:20ns 0.1% Settling for 2V Step
Excellent Video Performance Into 150W Load: Differential Gain of 0.20%, Differential Phase of 0.10
 Wide Supply Range:
      3V to 12V Single Supply
      ±1.5V to ±6V Dual Supplies
 Small Size:
     Low Profile (1mm) 6-Lead SOT-23 (ThinSOTTM),
     3mm x 3mm x 0.8mm DFN and 10-Lead MSOPPackages

Application

Buffers
Video Amplifers
Cable Drivers
Mobile Communication
Low Power/Battery Applications


Specifications

Total Supply Voltage (V+ to V) ........................... 13.2V
Input Current ................................................. ±10mA
Output Current .............................................. ±80mA
Output Short-Circuit Duration (Note 2) ........... Indefinite
Operating Temperature Range (Note 3) ... 40°C to 85°C
Specified Temperature Range (Note 4) .... 40°C to 85°C
Junction Temperature (Note 5) ............................ 150°C
Junction Temperature (DD Package) ................... 125°C
Storage Temperature Range ................. 65°C to 150°C
Storage Temperature Range
(DD Package) ................................... 65°C to 125°C
Lead Temperature (Soldering, 10 sec)................. 300°C

Description

The LT®6210/LT6211 are single/dual current feedback amplifiers with externally programmable supply current
and bandwidth ranging from 10MHz at 300mA per amplifier to 200MHz at 6mA per amplifier. They feature a low
distortion rail-to-rail output stage, 700V/ms slew rate and a minimum output current drive of 75mA.

The LT6210/LT6211 operate on supplies as low as a single 3V and up to either 12V or ±6V. The ISET pin allows for the optimization of quiescent current for specific bandwidth,distortion or slew rate requirements. Regardless of supply voltage, the supply current is programmable from just 300mA to 6mA per amplifier with an external resistor or current source.

The LT6210 is available in the low profile (1mm) 6-lead SOT-23 package. The LT6211 is available in the 10-lead MSOP and the 3mm x 3mm x 0.8mm DFN packages.