Features: ·Allows Safe Board Insertion and Removal from a Live Backplane·Controls Supply Voltage from 10.8V to 80V·Foldback Current Limiting·Overcurrent Fault Detection·Drives an External N-Channel MOSFET·Programmable Supply Voltage Power-Up Rate·Undervoltage Protection·Latch Off Operation Mode (L...
LT4256-1: Features: ·Allows Safe Board Insertion and Removal from a Live Backplane·Controls Supply Voltage from 10.8V to 80V·Foldback Current Limiting·Overcurrent Fault Detection·Drives an External N-Channel ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The LT®4256-1/LT4256-2 are high voltage Hot SwapTM controllers that allow a board to be safely inserted and removed from a live backplane. An internal driver drives an external N-channel MOSFET switch to control supply voltages ranging from 10.8V to 80V.
The LT4256-1/LT4256-2 features an adjustable analog foldback current limit. If the supply remains in current limit for more than a programmable time, the N-channel MOSFET shuts off and the PWRGD output asserts low. The LT4256-2 automatically restarts after a time-out delay. The LT4256-1 latches off until the UV pin is cycled low.
The PWRGD output indicates when the output voltage rises above a programmed level. An external resistor string from VCC provides programmable undervoltage protection.
The LT4256 can be used as an upgrade to LT1641 designs. See Table 1 on page 14 for upgraded specifications.
The LT4256-1 and LT4256-2 are available in an 8-pin SO package that is pin compatible with the LT1641.