Features: Wide Input Range: 3.6V to 34V Operating, 36V Maximum 2A Maximum Output Current Low Ripple Burst Mode® Operation 50µA IQ at 12VIN to 3.3VOUT Output Ripple < 15mV Adjustable Switching Frequency: 300kHz to 2.8MHz Low Shutdown Current: IQ < 1µA Integrated Boost Diode P...
LT3481: Features: Wide Input Range: 3.6V to 34V Operating, 36V Maximum 2A Maximum Output Current Low Ripple Burst Mode® Operation 50µA IQ at 12VIN to 3.3VOUT Output Ripple < 15mV Adjustable Sw...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The LT®3481 is an adjustable frequency (300kHz to 2.8MHz) monolithic buck switching regulator that accepts input voltages up to 34V (36V maximum). A high effi ciency 0.18 switch is included on the die along with a boost Schottky diode and the necessary oscillator, control, and logic circuitry. Current mode topology is used for fast transient response and good loop stability. Low ripple Burst Mode operation maintains high effi ciency at low output currents while keeping output ripple below 15mV in a typical application. In addition, the LT3481 can further enhance low output current effi ciency by drawing bias current from the output when VOUT is above 3V.
Shutdown reduces input supply current to less than 1µA while a resistor and capacitor on the RUN/SS pin provide a controlled output voltage ramp (soft-start). A power good fl ag signals when VOUT reaches 90% of the programmed output voltage. The LT3481 is available in 10-Pin MSOP and 3mm x 3mm DFN packages with exposed pads for low thermal resistance.