Features: ` Wide Input Range: 3V to 25V` Short-Circuit Protected Over Full Input Range` 2A Output Current Capability` Adjustable/Synchronizable Fixed Frequency Operation from 250kHz to 2.2MHz` Soft-Start/Tracking Capability` Output Adjustable Down to 0.8V` Adjustable Linear Regulator/Driver with 1...
LT1939: Features: ` Wide Input Range: 3V to 25V` Short-Circuit Protected Over Full Input Range` 2A Output Current Capability` Adjustable/Synchronizable Fixed Frequency Operation from 250kHz to 2.2MHz` Soft-...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
The LT®1939 is a current mode PWM step-down DC/DC converter with an internal 2.3A switch. The wide input
range of 3V to 25V makes the LT1939 suitable for regulating power from a wide variety of sources, including
automotive batteries, industrial supplies and unregulated wall adapters.
Resistor-programmable 250kHz to 2.2MHz frequency range and synchronization capability enable optimization between effi ciency and external component size. Cycleby- cycle current limit, frequency foldback and thermal shutdown provide protection against a shorted output. The soft-start feature controls the ramp rate of the output
voltage, eliminating input current surge during start-up, and also provides output tracking.
The LT1939 contains an internal NPN transistor with feedback control which can be confi gured as a linear regulator or as a linear regulator controller.
The LT1939's low current shutdown mode (<12A) enables easy power management in battery-powered systems.