Type: -
Max Output Power x Channels @ Load: -
Output Type: -
Voltage - Supply: -
Features: -
-3db Bandwidth: -
Voltage - Input Offset: 500µV
Current - Output / Channel: 60mA
Operating Temperature: 0°C ~ 70°C
Number of Circuits: 1
Mounting Type: Through Hole
Package / Case: 8-DIP (0.300", 7.62mm)
Supplier Device Package: 8-PDIP
Packaging: Tube
Amplifier Type: Voltage Feedback
Voltage - Supply, Single/Dual (±): 5 V ~ 36 V, ±2.5 V ~ 18 V
Current - Input Bias: 600nA
Slew Rate: 1000 V/µs
Gain Bandwidth Product: 70MHz
Manufacturer: Linear Technology
Series: C-Load™
Current - Supply: 6.3mA
Features: 70MHz Gain Bandwidth
1000V/ms Slew Rate
7.5mA Maximum Supply Current
9nV/ÖHz Input Noise Voltage
Unity-Gain Stable
C-LoadTM Op Amp Drives All Capacitive Loads
1.5mV Maximum Input Offset Voltage
2mA Maximum Input Bias Current
350nA Maximum Input Offset Current
50mA Minimum Output Current
±7.5V Minimum Output Swing into 150W
4.5V/mV Minimum DC Gain, RL=1k
50ns Settling Time to 0.1%, 10V Step
0.06% Differential Gain, AV=2, RL=150W
0.04° Differential Phase, AV=2, RL=150W
Specified at ±2.5V, ±5V, and ±15VApplication Wideband Amplifiers
Buffers
Active Filters
Video and RF Amplification
Cable Drivers
Data Acquisition SystemsPinout
SpecificationsTotal Supply Voltage (V+ to V) ............................... 36V
Differential Input Voltage
(Transient Only) (Note 2)................................... ±10V
Input Voltage ............................................................±VS
Output Short-Circuit Duration (Note 3) ............ Indefinite
Operating Temperature Range (Note 8) ...40°C to 85°C
Specified Temperature Range (Note 9) ....40°C to 85°C
Maximum Junction Temperature (See Below)
Plastic Package ................................................ 150°C
Storage Temperature Range ..................65°C to 150°C
Lead Temperature (Soldering, 10 sec).................. 300°C
Description
The LT1363 is a high speed, very high slew rate operational amplifier with excellent DC performance. The LT1363 features reduced supply current, lower input offset voltage, lower input bias current and higher DC gain than devices with comparable bandwidth. The circuit topology is a voltage feedback amplifier with the slewing characteristics of a current feedback amplifier.
The LT1363 is a single gain stage with outstanding settling characteristics which makes the circuit an ideal choice for data acquisition systems. The output drives a 150W load to ±7.5V with ±15V supplies and to ±3.4V on ±5V supplies.
The LT1363 is also capable of driving any capacitive load which makes it useful in buffer or cable driver applications. The LT1363 is a member of a family of fast, high performance amplifiers using this unique topology and employing Linear Technology Corporation's advanced bipolar complementary processing.
For dual and quad amplifier versions of the LT1363 see the LT1364/1365 data sheet. For 50MHz amplifiers with 4mA of supply current per amplifier see the LT1360 and LT1361/1362 data sheets. For lower supply current amplifiers with bandwidths of 12MHz and 25MHz see the LT1354 through LT1359 data sheets. Singles, duals, and quads of each amplifier are available.
Parameters:
| Technical/Catalog Information | LT1363CN8 |
| Vendor | Linear Technology |
| Category | Integrated Circuits (ICs) |
| Packaging | Tube |
| Amplifier Type | Voltage Feedback |
| Number of Circuits | 1 - Single |
| Package / Case | 8-DIP (300 mil) |
| Slew Rate | 1000 V/s |
| Gain Bandwidth Product | 70MHz |
| Current - Supply | 6.3mA |
| Current - Output / Channel | 60mA |
| Voltage - Supply, Single/Dual (±) | 5 V ~ 36 V, ±2.5 V ~ 18 V |
| Output Type | - |
| -3db Bandwidth | - |
| Current - Input Bias | 600nA |
| Operating Temperature | 0°C ~ 70°C |
| Voltage - Input Offset | 500V |
| Drawing Number | 161; 05-08-1510; N; 8 |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | LT1363CN8
LT1363CN8
|
LT1363CN8 Data Sheet
