Type: -
Max Output Power x Channels @ Load: -
Output Type: -
Voltage - Supply: -
Features: -
-3db Bandwidth: -
Operating Temperature: 0°C ~ 70°C
Current - Output / Channel: 30mA
Number of Circuits: 1
Mounting Type: Through Hole
Package / Case: 8-DIP (0.300", 7.62mm)
Supplier Device Package: 8-PDIP
Packaging: Tube
Current - Supply: 2mA
Voltage - Input Offset: 200µV
Amplifier Type: Voltage Feedback
Slew Rate: 600 V/µs
Manufacturer: Linear Technology
Series: C-Load™
Voltage - Supply, Single/Dual (±): ±2.5 V ~ 15 V
Gain Bandwidth Product: 25MHz
Current - Input Bias: 120nA
Features: 25MHz Gain Bandwidth
600V/ms Slew Rate
2.5mA Maximum Supply Current
Unity-Gain Stable
C-LoadTM Op Amp Drives All Capacitive Loads
8nV/ÖHz Input Noise Voltage
600mV Maximum Input Offset Voltage
500nA Maximum Input Bias Current
120nA Maximum Input Offset Current
20V/mV Minimum DC Gain, RL=1k
115ns Settling Time to 0.1%, 10V Step
220ns Settling Time to 0.01%, 10V Step
±12V Minimum Output Swing into 500W
±2.5V Minimum Output Swing into 150W
Specified at ±2.5V, ±5V, and ±15VApplication Wideband Amplifiers
Buffers
Active Filters
Data Acquisition Systems
Photodiode AmplifiersPinout
SpecificationsTotal Supply Voltage (V+ to V) ................................. 36V
Differential Input Voltage (Transient Only, Note 1) ... ±10V
Input Voltage ..............................................................±VS
Output Short-Circuit Duration (Note 2) .............. Indefinite
Operating Temperature Range ................ 40°C to 85°C
Specified Temperature Range (Note 6) ... 40°C to 85°C
Maximum Junction Temperature (See Below)
Plastic Package ...................................................... 150°C
Storage Temperature Range ................. 65°C to 150°C
Lead Temperature (Soldering, 10 sec).................... 300°C
Description
The LT®1357 is a high speed, very high slew rate operational amplifier with outstanding AC and DC performance. The LT1357 has much lower supply current, lower input offset voltage, lower input bias current, and higher DC gain than devices with comparable bandwidth. The circuit topology is a voltage feedback amplifier with the slewing characteristics of a current feedback amplifier. The amplifier is a single gain stage with outstanding settling characteristics which makes the circuit an ideal choice for data acquisition systems. The output drives a 500W load to ±12V with ±15V supplies and a 150W load to ±2.5V on ±5V supplies. The amplifier is also stable with any capacitive load which makes it useful in buffer or cable driver applications.
The LT1357 is a member of a family of fast, high performance amplifiers using this unique topology and employing Linear Technology Corporation's advanced bipolar complementary processing. For dual and quad amplifier versions of the LT1357 see the LT1358/LT1359 data sheet. For higher bandwidth devices with higher supply current see the LT1360 through LT1365 data sheets. For lower supply current amplifiers see the LT1354 and LT1355/ LT1356 data sheets. Singles, duals, and quads of each amplifier are available.
Parameters:
| Technical/Catalog Information | LT1357CN8 |
| Vendor | Linear Technology |
| Category | Integrated Circuits (ICs) |
| Packaging | Tube |
| Amplifier Type | Voltage Feedback |
| Number of Circuits | 1 - Single |
| Package / Case | 8-DIP (300 mil) |
| Slew Rate | 600 V/s |
| Gain Bandwidth Product | 25MHz |
| Current - Supply | 2mA |
| Current - Output / Channel | 30mA |
| Voltage - Supply, Single/Dual (±) | ±2.5 V ~ 15 V |
| Output Type | - |
| -3db Bandwidth | - |
| Current - Input Bias | 120nA |
| Operating Temperature | 0°C ~ 70°C |
| Voltage - Input Offset | 200V |
| Drawing Number | 161; 05-08-1510; N; 8 |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | LT1357CN8
LT1357CN8
|
LT1357CN8 Data Sheet
