LT1352CN8

Type: -
Number of Circuits: 2
Max Output Power x Channels @ Load: -
Output Type: -
Voltage - Supply: -
Features: -
Gain Bandwidth Product: 3MHz
-3db Bandwidth: -
Current - Input Bias: 20nA
Operating Temperature: 0°C ~ 70°C
Mounting Type: Through Hole
Package / Case: 8-DIP (0.300", 7.62mm)
Supplier Device Package: 8-PDIP
Packaging: Tube
Voltage - Input Offset: 200µV
Amplifier Type: Voltage Feedback
Current - Supply: 250µA
Manufacturer: Linear Technology
Series: C-Load™
Voltage - Supply, Single/Dual (±): ±2.5 V ~ 15 V
Slew Rate: 200 V/µs
Current - Output / Channel: 13.4mA


Features:

3MHz Gain Bandwidth
200V/ms Slew Rate
250mA Supply Current per Amplifier
C-LoadTM Op Amp Drives All Capacitive Loads
Unity-Gain Stable
Maximum Input Offset Voltage: 600mV
Maximum Input Bias Current: 50nA
Maximum Input Offset Current: 15nA
Minimum DC Gain, RL = 2k: 30V/mV
Input Noise Voltage: 14nV/ÖHz
Settling Time to 0.1%, 10V Step: 700ns
Settling Time to 0.01%, 10V Step: 1.25ms
Minimum Output Swing into 1k: ±13V
Minimum Output Swing into 500W: ±3.4V
Specified at ±2.5V, ±5V and ±15V


Application

Battery-Powered Systems
Wideband Amplifiers
Buffers
Active Filters
Data Acquisition Systems
Photodiode Amplifiers


Pinout




Specifications

Total Supply Voltage (V+ to V) .............................. 36V
Differential Input Voltage ....................................... ±10V
Input Voltage .......................................................... ±VS
Output Short-Circuit Duration (Note 1) ........... Indefinite
Operating Temperature Range ...........  40°C to 85°C
Specified Temperature Range .............  40°C to 85°C
Maximum Junction Temperature (See Below)
Plastic Package ............................................... 150°C
Storage Temperature Range ...............65°C to 150°C
Lead Temperature (Soldering, 10 sec).................. 300°C


Description

The LT®1352/LT1353 are dual and quad, very low power, high speed operational amplifiers with outstanding AC and DC performance. The amplifiers feature much lower supply current and higher slew rate than devices with comparable bandwidth. The circuit combines the slewing performance of a current feedback amplifier in a true operational amplifier with matched high impedance inputs. The high slew rate ensures that the large-signal bandwidth is not degraded. Each output is capable of driving a 1kW load to ±13V with ±15V supplies and a 500W load to ±3.4V on ±5V supplies. 

The LT1352/LT1353 are members of a family of fast, high performance amplifiers using this unique topology and employing Linear Technology Corporation's advanced complementary bipolar processing. For higher bandwidth devices with higher supply current see the LT1354 through LT1365 data sheets. Bandwidths of 12MHz, 25MHz, 50MHz and 70MHz are available with 1mA, 2mA, 4mA and 6mA of supply current per amplifier. Singles, duals and quads of each amplifier are available.



Parameters: 

Technical/Catalog Information
LT1352CN8
Vendor
Linear Technology 
Category
Integrated Circuits (ICs) 
  
Packaging
Tube
Amplifier Type
Voltage Feedback
Number of Circuits
2 - Dual
Package / Case
8-DIP (300 mil) 
Slew Rate
200 V/s 
Gain Bandwidth Product
3MHz
Current - Supply
250A 
Current - Output / Channel
13.4mA
Voltage - Supply, Single/Dual (±)
±2.5 V ~ 15 V
Output Type
-
-3db Bandwidth
-
Current - Input Bias
20nA
Operating Temperature
0°C ~ 70°C
Voltage - Input Offset
200V 
Drawing Number
161; 05-08-1510; N; 8
  
Lead Free Status
Contains Lead
  
RoHS Status
RoHS Non-Compliant
 
  
Other Names
  
            LT1352CN8
      LT1352CN8