LT1168

The LT^®1168 is a micropower, precision instrumentation amplifier that requires only one external resistor to set gains
of 1 to 10,000. The low voltage noise of 10nV/Hz (at 1kHz) is not compromised by low power dissipation (350mA typical for ±15V supplies). The wide supply range of ±2.3V to ±18V allows the LT1168 to fit into a wide variety of industrial as well as battery-powered applications.

The high accuracy of the LT1168 is due to a 20ppm maximum monolithic instrumentation amps cannot handle a 2k load resistor whereas the nonlinearity of the device is specified for loads as low as 2k. The devce is laser trimmed for very low input offset voltage (40V max), drift (0.3V/°C), high CMRR (90dB, G = 1) and PSRR (103dB, G = 1). Low input bias currents of 250pA max are achieved with the use of superbeta processing. The output can handle capacitive loads up to 1000pF in any gain configuration while the inputs are ESD protected up to 13kV (human body). The device with two external 5k resistors passes the IEC 1000-4-2 level 4 specification.

The LT1168 is a pin-for-pin improved second source for the AD620 and INA118. The device, offered in 8-pin PDIP and
SO packages, requires significantly less PC board area than discrete op amp resistor designs. These advantages make the LT1168 the most cost effective solution for precision instrumentation amplifier applications.