LT1056

` Guaranteed Offset Voltage: 150mV Max
   55°C to 125°C: 500mV Max
` Guaranteed Drift: 4mV/°C Max
` Guaranteed Bias Current
   70°C: 150pA Max
   125°C: 2.5nA Max
` Guaranteed Slew Rate: 12V/ms Min

· Precision, High Speed Instrumentation
· Logarithmic Amplifiers
· D/A Output Amplifiers
· Photodiode Amplifiers
· Voltage-to-Frequency Converters
· Frequency-to-Voltage Converters
· Fast, Precision Sample-and-Hold

Supply Voltage .................................................. ±20V
Differential Input Voltage .................................. ±40V
Input Voltage .................................................... ±20V
Output Short-Circuit Duration ..................... Indefinite
Operating Temperature Range
     LT1055AM/LT1055M/LT1056AM/
     LT1056M (OBSOLETE) .............. 55°C to 125°C
     LT1055AC/LT1055C/LT1056AC/
     LT1056C.......................................... 0°C to 70°C
Storage Temperature Range
    All Devices .................................65°C to 150°C
Lead Temperature (Soldering, 10 sec)............ 300°C

The LT^®1055/LT1056 JFET input operational amplifiers combine precision specifications with high speed performance.

For the first time, 16V/s slew rate and 6.5MHz gain bandwidth product are simultaneously achieved with offset voltage of typically 50V, 1.2V/°C drift, bias currents of 40pA at 70°C and 500pA at 125°C.

The 150V maximum offset voltage specification is the best available on any JFET input operational amplifier.
The LT1055 and LT1056 are differentiated by their operating currents. The lower power dissipation LT1055 achieves lower bias and offset currents and offset voltage. The additional power dissipation of the LT1056 permits higher slew rate, bandwidth and faster settling time with a slight sacrifice in DC performance.

The voltage-to-frequency converter shown below is one of the many applications which utilize both the precision and high speed of the LT1055/LT1056.

For a JFET input op amp with 23V/ms guaranteed slew rate, refer to the LT1022 data sheet.