LT1036M

The LT1036M is designed as logic controlled regulator which features two positive regulators in the same package. The 12V main regulator offers excellent performance while supplying load currents up to 3A, and the 5V auxiliary regulator provides similar performance while supplying lighter loads of 75mA.

LT1036M has six features. (1)Tow regulator outputs +12V at 3A and +5V at 75mA. (2)2% output voltage tolerance. (3)60dB ripple rejection. (4)0.7% load regulation. (5)TTL and CMOS compatible logix control. (6)100% thermal burn-in on all devices. Those are all the main features.

Some absolute maximum ratings of LT1036M have been concluded into several points as follow. (1)Its power dissipation continuous would be 24W. (2)ts power dissipation fault conditions would be internally limited. (3)Its input voltage would be 30V. (4)Its enable voltage would be 30V. (5)Its operating junction temperature would be from -55°C to 150°C. (6)Its storage temperature range would be from -65°C to 150°C. (7)Its lead temperature (soldering 10 sec) would be 300°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of LT1036M are concluded as follow. (1)Its output voltage would be min 11.52V and max 12.48V for high and would be typ 0.1V and max 0.3V for low. (2)Its load regulation would be typ 10mV and max 80mV. (3)Its line regulation would be typ 1mV/V and max 4mV/V. (4)Its ripple rejection would be min 50dB and typ 60dB. (5)Its thermal regulation would be typ 0.003%/W and max 0.012%/W. (6)Its available load current would be min 3A and typ 4A. (7)Its short circuit current would be typ 2.3A and max 4A. (8)Its input voltage to maintain regulation (dropout voltage) would be typ 13.8V and max 14.5V at output current 1A. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!