LT1035M

The LT1035M is designed as logic controlled regulator which features two positive 5V regulators in the same package. The main regulator offers excellent performance while supplying load currents up to 3A, and the auxiliary regulator provides similar performance while supplying lighter loads of 75mA.

LT1035M has six features. (1)Tow regulator outputs +5V at 3A and +5V at 75mA. (2)2% output voltage tolerance. (3)66dB ripple rejection. (4)0.7% load regulation. (5)TTL and CMOS compatible logix control. (6)100% thermal burn-in on all devices. Those are all the main features.

Some absolute maximum ratings of LT1035M have been concluded into several points as follow. (1)Its power dissipation continuous would be 24W. (2)ts power dissipation fault conditions would be internally limited. (3)Its input voltage would be 20V. (4)Its enable voltage would be 20V. (5)Its operating junction temperature would be from -55°C to 150°C. (6)Its storage temperature range would be from -65°C to 150°C. (7)Its lead temperature (soldering 10 sec) would be 300°C. It should be noted that stresses above those listed in absolute maximum ratings may cause permanent damage to device.

Also some electrical characteristics of LT1035M are concluded as follow. (1)Its output voltage would be min 4.8V and max 5.2V for high and would be typ 0.1V and max 0.3V for low. (2)Its load regulation would be typ 10mV and max 35mV. (3)Its line regulation would be typ 0.3mV/V and max 2mV/V. (4)Its ripple rejection would be min 60dB and typ 70dB. (5)Its thermal regulation would be typ 0.003%/W and max 0.012%/W. (6)Its available load current would be min 3A and typ 4A. (7)Its short circuit current would be typ 2.5A and max 4A for Vin=20V. (8)Its input voltage to maintain regulation would be min 7.2V and typ 6.7V at output current 1A. And so on. If you have any question or suggestion or want to know more information please contact us for details. Thank you!