Features: Ultra low dropout voltage (210 mV @ 3A typ)
Low ground pin current
Load regulation of 0.04%/A
60 nA typical quiescent current in shutdown
1.5% output accuracy (25)
TO-220, TO-263 packages
Over temperature/over current protection
-40 to +125?C junction temperature rangeApplicationDSP Power Supplies
Server Core and I/O Supplies
Linear Power Supplies for PC Add-in-Cards
Set-Top Box Power Supplies
Microprocessor Power Supplies
High Efficiency Linear Power Supplies
SMPS Post-RegulatorsSpecifications
| Output Current |
3000 mA |
| Output Min |
1.2, 1.5 Volt |
| Input Min Voltage |
1.426, 1.71 Volt |
| Input Max Voltage |
5.5 Volt |
| Dropout Voltage |
0.21 Volt |
| Adjustable Output |
No |
| Quiescent Current |
4 mA |
| On/Off Pin |
Yes |
| Error Flag |
No |
| RegType |
LDO |
| Temperature Min |
-40 deg C |
| Temperature Max |
125 deg C |
| Output Voltage |
1.2, 1.5 Volt |
| Output Max |
1.8, 1.2, 1.5 Volt |
| View Using Catalog |
Storage Temperature Range..................................... -65 to +150
Lead Temp. (Soldering, 5 seconds) ...........................................260
ESD Rating
Human Body Model (Note 3) .........................................................2kV
Machine Model (Note 10) ............................................................200V
Power Dissipation (Note 2) .....................................Internally Limited
VIN Supply Voltage (Survival) ..........................................-0.3V to +6V
VBIAS Supply Voltage (Survival)....................................... -0.3V to +7V
Shutdown Input Voltage (Survival) .................................-0.3V to +7V
IOUT (Survival).......................................................Internally Limited
Output Voltage (Survival)...............................................-0.3V to +6V
Junction Temperature................................................-40 to +150
DescriptionThe LP3883 is a high-current, fast-response regulator which can maintain output voltage regulation with minimum input to output voltage drop. Fabricated on a CMOS process, the device operates from two input voltages: Vbias provides voltage to drive the gate of the N-MOS power transistor, while Vin is the input voltage which supplies power to the load. The use of an external bias rail allows the part to operate from ultra low Vin voltages. Unlike bipolar regulators, the CMOS architecture consumes extremely low quiescent current at any output load current. The use of an N-MOS power transistor results in wide bandwidth, yet minimum external capacitance is required to maintain loop stability.
The fast transient response of these devices makes them suitable for use in powering DSP, Microcontroller Core voltages and Switch Mode Power Supply post regulators. The parts are available in TO-220 and TO-263 packages.
Dropout Voltage: 210 mV (typ) @ 3A load current.
Ground Pin Current: 3 mA (typ) at full load.
Shutdown Current: 60 nA (typ) when S/D pin is low.
Precision Output Voltage: 1.5% room temperature accuracy.
Reliability Metrics
| Part Number |
Process |
EFR Reject |
EFR Sample Size |
PPM |
LTA Rejects |
LTA Device Hours |
FITS |
MTTF (Hours) |
| LP3883ES-1.2 |
CS065 |
2 |
34108 |
59 |
0 |
3862000 |
1 |
1095853045 |
| LP3883ES-1.5 |
CS065 |
2 |
34108 |
59 |
0 |
3862000 |
1 |
1095853045 |
| LP3883ES-1.8 |
CS065 |
2 |
34108 |
59 |
0 |
3862000 |
1 |
1095853045 |
| LP3883ESX-1.2 |
CS065 |
2 |
34108 |
59 |
0 |
3862000 |
1 |
1095853045 |
| LP3883ESX-1.5 |
CS065 |
2 |
34108 |
59 |
0 |
3862000 |
1 |
1095853045 |
| LP3883ESX-1.8 |
CS065 |
2 |
34108 |
59 |
0 |
3862000 |
1 |
1095853045 |
| LP3883ET-1.2 |
CS065 |
2 |
34108 |
59 |
0 |
3862000 |
1 |
1095853045 |
| LP3883ET-1.5 |
CS065 |
2 |
34108 |
59 |
0 |
3862000 |
1 |
1095853045 |
| LP3883ET-1.8 |
CS065 |
2 |
34108 |
59 |
0 |
3862000 |
1 |
1095853045 |
Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.For more information on Reliability Metrics, please click here.
More Application Notes
| Title |
Size in Kbytes |
Date |
|
| AN-1457: Application Note 1457 LP3884X-ADJ Evaluation Board |
431 Kbytes |
16-Jun-06 |
Download |
If you have trouble printing or viewing PDF file(s), see Printing Problems.
|
LP3883 Data Sheet
