Features: 2.5% output accuracy (25°C) Low dropout voltage: 450mV @ 1A (typ, 5V out)Wide input voltage range (2.7V to 10V)Precision (trimmed) bandgap referenceGuaranteed specs for -40°C to +125°C 1µA off-state quiescent currentThermal overload protection T0-252, SOT-223 and 6-Lead LLP packag...
LP38690: Features: 2.5% output accuracy (25°C) Low dropout voltage: 450mV @ 1A (typ, 5V out)Wide input voltage range (2.7V to 10V)Precision (trimmed) bandgap referenceGuaranteed specs for -40°C to +125°C 1&...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
PinoutSpecificationsOutput Current1500 mAOutput Min0.6 VoltInput Min Voltage2.7 VoltInput Max Volt...
Storage Temperature Range............................. −65°C to +150°C
Lead Temp. (Soldering, 5 seconds) .......................................260°C
ESD Rating (Note 3...................................................................) 2 kV
Power Dissipation (Note 2) ...................................Internally Limited
V(max) All pins (with respect to GND) ...........................-0.3V to 12V
Output Current | 1000 mA |
Output Min | 1.8, 5.0, 2.5, 3.3 Volt |
Input Min Voltage | 2.75, 3.95, 3.3, 5.45 Volt |
Input Max Voltage | 10 Volt |
Dropout Voltage | 0.45, 0.95, 0.8, 0.65 Volt |
Adjustable Output | No |
Quiescent Current | 0.055 mA |
PSRR | 55 dB |
Voltage Noise (rms) | 70 uV |
Ceramic Capacitors Stable | Yes |
Feedback Tolerance | 2.5 % |
On/Off Pin | No |
Error Flag | No |
RegType | LDO |
Temperature Min | -40 deg C |
Temperature Max | 125 deg C |
Output Voltage | 1.8, 5.0, 2.5, 3.3 Volt |
Output Max | 1.8, 5.0, 2.5, 3.3 Volt |
PowerWise | Yes |
View Using Catalog |
The LP38690/2 low dropout CMOS linear regulators provide tight output tolerance (2.5% typical), extremely low dropout voltage (450mV @ 1A load current, VOUT = 5V), and excellent AC performance utilizing ultra low ESR ceramic output capacitors. The low thermal resistance of the LLP, SOT-223 and T0-252 packages allow the full operating current to be used even in high ambient temperature environments.
The use of a PMOS power transistor means that no DC base drive current is required to bias it allowing ground pin current to remain below 100 µA regardless of load current, input voltage, or operating temperature. Dropout Voltage: 450 mV (typ) @ 1A (typ. 5V out). Ground Pin Current: 55 µA (typ) at full load. Precision Output Voltage: 2.5% (25°C) accuracy.