Features: (VS =5V,TA = 25˚C, Typical values unless otherwise speci-fied) Propagation delay 45ns Low supply current 65µA Rail-to-Rail input Open drain and push-pull output Ideal for 2.7V and 5V single supply applicationsn Available in space saving packages: 5-pin SOT23-5 and 5-pin SC70-5...
LMV7239: Features: (VS =5V,TA = 25˚C, Typical values unless otherwise speci-fied) Propagation delay 45ns Low supply current 65µA Rail-to-Rail input Open drain and push-pull output Ideal for 2.7V a...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Response Time | 0.045 us |
Output Bus | Push Pull |
Supply Min | 2.7 Volt |
Supply Max | 5.5 Volt |
Channels | 1 Channels |
Offset Voltage max, 25C | 6 mV |
Output Current | 55 mA |
Input Range | R-R Input |
Supply Current Per Channel | 0.065 mA |
PowerWise Rating 3 | 3 uA x us |
Max Input Bias Current | 600 nA |
Temperature Min | -40 deg C |
Temperature Max | 85 deg C |
Function | Comparator |
AEC Q-100 Automotive Grade | 0 |
PowerWise | Yes |
View Using Catalog |
The LMV7239 are ultra low power, low voltage, 45nscomparators. They are guaranteed to operate over the fullsupply voltage range of 2.7V to 5V. These devices achieve a45ns propagation delay while consuming only 65µA of sup-ply current at 5V.
The LMV7239 have a greater than rail-to-rail commonmode voltage range. The input common mode voltage rangeextends 200mV below ground and 200mV above supply,allowing both ground and supply sensing.
The LMV7235 features an open drain output. By connectingan external resistor, the output of the comparator can beused as a level shifter.
The LMV7239 features a push-pull output stage. This featureallows operation without the need of an external pull-upresistor.
The LMV7235/39 are available in the SC70-5 and SOT23-5packages, which are ideal for systems where small size and low power is critical.