Features: (Typical 2.7V Supply Values;Unless Otherwise Noted)
·Guaranteed 2.7V and 5V specifications
·Input referred voltage noise (@10kHz) 29nV/
·Supply current (per amplifier) 100µA
·Gain bandwidth product 1.0MHz
·Slew rate 1.0V/µs
·Shutdown Current (LMV341) 45pA
·Turn-on time from shutdown (LMV341) 5µs
·Input bias current 20fAApplication·Cordless/cellular phones
·Laptops
·PDAs
·PCMCIA/Audio
·Portable/battery-powered electronic equipment
·Supply current monitoring
·Battery monitoring
·Buffer
·Filter
·DriverPinout
Specifications
| Supply Min |
2.7 Volt |
| Supply Max |
5.5 Volt |
| Gain Bandwidth |
1 MHz |
| Slew Rate |
1 Volts/usec |
| Offset Voltage max, 25C |
5 mV |
| Max Input Bias Current |
0.375 nA |
| Input OutputType |
Vcm to V-, R-R Out |
| Supply Current Per Channel |
0.107 mA |
| PowerWise Rating 2 |
107 uA/MHz |
| Channels |
2 Channels |
| Output Current |
75 mA |
| Shut down |
No |
| Special Features |
Undefined |
| Voltage Noise |
39 nV/root(Hz) |
| Temperature Max |
125 deg C |
| Temperature Min |
-40 deg C |
| Function |
Op Amp |
| View Using Catalog |
ESD Tolerance (Note 2)
Machine Model ...............................................................200V
Human Body Model ......................................................2000V
Differential Input Voltage ...........................± Supply Voltage
Supply Voltage (V + -V −) ...............................................5.5V
Output Short Circuit to V + .......................................(Note 3)
Output Short Circuit to V − .......................................(Note 4)
Storage Temperature Range ..........................−65 to 150
Junction Temperature (Note 5) .....................................150
Mounting Temperature
Infrared or Convection Reflow
(20 sec.) .......................................................................235
Wave Soldering Lead Temp.
(10 sec.) .......................................................................260DescriptionThe LMV341/LMV342/LMV344 are single, dual, and quad low voltage, low power Operational Amplifiers. They are designed specifically for low voltage portable applications. Other important product characteristics are low input bias current, rail-to-rail output, and wide temperature range.
The patented class AB turnaround stage significantly reduces the noise at higher frequencies, power consumption, and offset voltage. The PMOS input stage provides the user with ultra-low input bias current of 20fA (typical) and high input impedance.
The industrial-plus temperature range of −40°C to 125°C allows the LMV341/LMV342/LMV344 to accommodate a broad range of extended environment applications. LMV341 expands National Semiconductor's Silicon Dust amplifier portfolio offering enhancements in size, speed, and power savings. The LMV341/LMV342/LMV344 are guaranteed to operate over the voltage range of 2.7V to 5.5V and all have rail-to-rail output.
The LMV341 offers a shutdown pin that can be used to disable the device. Once in shutdown mode, the supply current is reduced to 45pA (typical). The LMV341/LMV342/LMV344 have 29nV Voltage Noise at 10KHz, 1MHz GBW, 1.0V/s Slew Rate, 0.25mVos, and 0.1A shutdown current (LMV341.)
The LMV341 is offered in the tiny 6-Pin SC70 package, the LMV342 in space saving 8-Pin MSOP and SOIC, and the LMV344 in 14-Pin TSSOP and SOIC. These small package amplifiers offer an ideal solution for applications requiring minimum PC board footprint. Applications with area constrained PC board requirements include portable electronics such as cellular handsets and PDAs.
Reliability Metrics
| Part Number |
Process |
EFR Reject |
EFR Sample Size |
PPM |
LTA Rejects |
LTA Device Hours |
FITS |
MTTF (Hours) |
| LMV342MA |
CS080 |
0 |
29095 |
0 |
0 |
2720500 |
2 |
771949303 |
| LMV342MAX |
CS080 |
0 |
29095 |
0 |
0 |
2720500 |
2 |
771949303 |
| LMV342MM |
CS080 |
0 |
29095 |
0 |
0 |
2720500 |
2 |
771949303 |
| LMV342MMX |
CS080 |
0 |
29095 |
0 |
0 |
2720500 |
2 |
771949303 |
Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.For more information on Reliability Metrics, please click here.
LMV342 Data Sheet
