Features: ·400MHz (AV = +2V/V, VOUT = 500mVPP) −3dB BW·250MHz (AV = +2V/V, VOUT = 2VPP) -3dB BW·0.1dB gain flatness to 120MHz·Low power: 5.6mA·TTL compatible shutdown pin (LMH6720)·Very low diff. gain, phase: 0.01%, 0.01° (LMH6714)·−58 HD2/ −70 HD3 at 20MHz·Fast slew rate: 1800V/...
LMH6714: Features: ·400MHz (AV = +2V/V, VOUT = 500mVPP) −3dB BW·250MHz (AV = +2V/V, VOUT = 2VPP) -3dB BW·0.1dB gain flatness to 120MHz·Low power: 5.6mA·TTL compatible shutdown pin (LMH6720)·Very low di...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
US $2.32 - 3.51 / Piece
Operational Amplifiers - Op Amps HIGH SPEED HIGH OUTPUT CURRENT
-3dB BW | 400 MHz |
AvCL for -3dB BW | 2 V/V |
Slew Rate | 1800 Volts/usec |
Input OutputType | Not Rail to Rail |
Supply Min | 10 Volt |
Supply Max | 12 Volt |
Supply Current Per Channel | 5.6 mA |
PowerWise Rating 2 | 7 uA/MHz |
Channels | 1 Channels |
Offset Voltage max, 25C | 6 mV |
Max Input Bias Current | 15000 nA |
Output Current | 70 mA |
Voltage Noise | 3.4 nV/root(Hz) |
Shut down | No |
Feedback Type | Current |
Av+1 BW | 420 MHz |
Av+2 BW | 400 MHz |
Av+5 BW | 150 MHz |
HD 2nd | -58 dB |
HD 3rd | -70 dB |
Diff Gain | 0.02 dB |
Diff Phase | 0.01 % |
Settling Time | 12 ns |
Tsettling Conditions | to 0.05% |
Function | Op Amp |
Gain Bandwidth | 400 MHz |
Temperature Min | -40 deg C |
Temperature Max | 85 deg C |
PowerWise | Yes |
View Using Catalog |
The LMH6714/6720/6722 series combine National's VIP10™ high speed complementary bipolar process with National's current feedback topology to produce a very high speed op amp. These amplifiers provide a 400MHz small signal bandwidth at a gain of +2V/V and a 1800V/µs slew rate while consuming only 5.6mA from ±5V supplies.
The LMH6714/6720/6722 series offer exceptional video performance with its 0.01% and 0.01° differential gain and phase errors for NTSC and PAL video signals while driving a back terminated 75Ω load. They also offer a flat gain response of 0.1dB to 120MHz. Additionally, they can deliver 70mA continuous output current. This level of performance makes them an ideal op amp for broadcast quality video systems.
The LMH6714/6720/6722's small packages (SOIC & SOT23), low power requirement, low noise and distortion allow the LMH6714/6720/6722 to serve portable RF applications.
The high impedance state during shutdown makes the LMH6720 suitable for use in multiplexing multiple high speed signals onto a shared transmission line. The LMH6720 is also ideal for portable applications where current draw can be reduced with the shutdown function.