Features: (VS = 12V, TA = 25°C, Typical values unless specified).`GBWP 15MHz` Wide supply voltage range 2.5V to 24V` Slew rate 15V/µs` Supply current/channel 0.95mA`Cap load tolerance Unlimited`Output short circuit current ±130mA` Output current (1V from rails) ±65mA` Input common mode volta...
LM8272: Features: (VS = 12V, TA = 25°C, Typical values unless specified).`GBWP 15MHz` Wide supply voltage range 2.5V to 24V` Slew rate 15V/µs` Supply current/channel 0.95mA`Cap load tolerance Unlimite...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Output Current | 100 mA |
Offset Voltage max, 25C | 5 mV |
Gain Bandwidth | 13 MHz |
Supply Min | 2.5 Volt |
Supply Max | 24 Volt |
Supply Current Per Channel | 0.9 mA |
PowerWise Rating 2 | 69.2 uA/MHz |
Slew Rate | 12 Volts/usec |
Input OutputType | R-R In and Out |
Max Input Bias Current | 2700 nA |
Voltage Noise | 15 nV/root(Hz) |
Shut down | No |
Special Features | High Cload Drive |
Function | Op Amp |
Channels | 2 Channels |
Temperature Min | -40 deg C |
Temperature Max | 85 deg C |
Automotive Selection Guide | Yes |
View Using Catalog |
The LM8272 is a Rail-to-Rail input and output Op Amp which can operate with a wide supply voltage range. This device has high output current drive, greater than Rail-to-Rail input common mode voltage range, unlimited capacitive load drive capability while requiring only 0.95mA/channel supply current. It is specifically designed to handle the requirements flat panel TFT panel VCOM driver applications as well as being suitable for other low power, and medium speed applications which require ease of use and enhanced performance over existing devices. Greater than Rail-to-Rail input common mode voltage range with 50dB of Common Mode Rejection, allows high side and low side sensing, among many applications, without having any concerns over exceeding the range and no compromise in accuracy. Exceptionally wide operating supply voltage range of 2.5V to 24V alleviates any concerns over functionality under extreme conditions and offers flexibility of use multitude of applications. In addition, most device parameters are insensitive to power supply variations; this design enhancement is yet another step in simplifying its usage.
The LM8272 is offered in the 8-pin MSOP package.