Features: (VS = 5V, TA = 25°C, Typical values unless specified).·GBWP .......................................................................21MHz·Wide supply voltage range ......................................2.5V to 30V·Slew rate ....................................................................
LM8261: Features: (VS = 5V, TA = 25°C, Typical values unless specified).·GBWP .......................................................................21MHz·Wide supply voltage range ............................
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Output Current | 53 mA |
Offset Voltage max, 25C | 5 mV |
Gain Bandwidth | 21 MHz |
Supply Min | 2.5 Volt |
Supply Max | 30 Volt |
Supply Current Per Channel | 0.97 mA |
PowerWise Rating 2 | 46.2 uA/MHz |
Slew Rate | 12 Volts/usec |
Input OutputType | R-R In and Out |
Max Input Bias Current | 2700 nA |
Voltage Noise | 15 nV/root(Hz) |
Shut down | No |
Special Features | High Cload Drive |
Function | Op Amp |
Channels | 1 Channels |
Temperature Min | -40 deg C |
Temperature Max | 85 deg C |
Automotive Selection Guide | Yes |
View Using Catalog |
The LM8261 is a Rail-to-Rail input and output Op Amp which can operate with a wide supply voltage range. This device has high output current drive, greater than Rail-to-Rail input common mode voltage range, unlimited capacitive load drive capability, and provides tested and guaranteed high speed and slew rate while requiring only 0.97mA supply current. It is specifically designed to handle the requirements of flat panel TFT panel VCOM driver applications as well as being suitable for other low power, and medium speed applications which require ease of use and enhanced performance over existing devices. Greater than Rail-to-Rail input common mode voltage range with 50dB of Common Mode Rejection, allows high side and low side sensing, among many applications, without having any concerns over exceeding the range and no compromise in accuracy. Exceptionally wide operating supply voltage range of 2.5V to 30V alleviates any concerns over functionality under extreme conditions and offers flexibility of use in multitude of applications. In addition, most device parameters are insensitive to power supply variations; this design enhancement is yet another step in simplifying its usage.
The output stage has low distortion (0.05% THD+N) and can supply a respectable amount of current (15mA) with minimal headroom from either rail (300mV).
The LM8261 is offered in the space saving SOT23-5 package.