Features: · Temperature sensing·6 positive voltage inputs with scaling resistors for monitoring +5V, +12V, +3.3V, +2.5V, Vccp power supplies directly·8-bit DAC output for controlling fan speed· 2 fan speed monitoring inputs·Chassis Intrusion Detector input·WATCHDOG™ comparison of all monitor...
LM81: Features: · Temperature sensing·6 positive voltage inputs with scaling resistors for monitoring +5V, +12V, +3.3V, +2.5V, Vccp power supplies directly·8-bit DAC output for controlling fan speed· 2 fa...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
· System Thermal and Hardware Monitoring for Servers and PCs
· Office Electronics
· Electronic Test Equipment and Instrumentation
Temp Resolution | 9-bit/0.5degC;12-bit/0.0625degC |
TruTherm(TM) Beta Compensation | No |
Analog Inputs | 6 |
ADC Resolution | 8 bits |
Fan Speed Inputs | 2 |
Fan Control Output(s) | 1 DAC |
Fan Control Method | Undefined |
VID Inputs | 5 |
Dynamic VID VCCP Monitoring | Undefined |
Bidirectional PROCHOT Support | Undefined |
GPIOs | CI, RESET |
Interrupt Outputs | 2 |
Reference Voltage | Undefined |
Temperature Accuracy (+/-) | 3 deg C |
Temperature Min | -40 deg C |
Temperature Max | 125 deg C |
Interface Type | SMBus |
Supply Min | 2.8 Volt |
Supply Max | 3.8 Volt |
Quiescent Current | 0.9 mA |
Resolution | 9 bits |
Temperature Accuracy (+/-) | 3 deg C |
View Using Catalog |
The LM81 is a highly integrated data acquisition system for hardware monitoring of servers, Personal Computers, or virtually any microprocessor-based system. In a PC, the LM81 can be used to monitor power supply voltages, temperatures, and fan speeds. Actual values for these inputs can be read at any time. Programmable WATCHDOG™ limits in the LM81 activate a fully programmable and maskable interrupt system with two outputs (INT and T_CRIT_).
The LM81 has an on-chip digital output temperature sensor with 9-bit or 12-bit resolution, a 6 analog input ADC with 8-bit resolution and an 8-bit DAC. Two fan tachometer outputs can be measured with the LM81's FAN1 and FAN2 inputs.
The DAC, with a 0 to 1.25V output voltage range, can be used for fan speed control. Additional inputs are provided for Chassis Intrusion detection circuits, and VID monitor inputs.
The LM81 has a Serial Bus interface that is compatible with SMBus™.