LM78

Features:

·Temperature sensing
·5 positive voltage inputs
·2 op amps for negative voltage monitoring
·3 fan speed monitoring inputs
· Input for additional temperature sensors
·Chassis Intrusion Detector input
·WATCHDOG comparison of all monitored values
·POST code storage RAM
·ISA and I²C™ Serial Bus interfaces


Application

·System Hardware Monitoring for Servers and PCs
·Office Electronics
·Electronic Test Equipment and Instrumentation


Specifications

If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications.
Positive Supply Voltage (V_CC) ................6.5V
Voltage on Any Input or Output Pin .....−0.3V to (V_CC+0.3V)
Ground Difference (GNDDGNDA) ............±300 mV
Input Current at any Pin (Note 3) .............±5 mA
Package Input Current (Note 3) .............±20 mA
Maximum Junction Temperature (T_J max) ..........150
ESD Susceptibility(Note 5)
Human Body Model .....................2000V
Machine Model........................ 175V
Soldering Information
PQFP Package (Note 6) :
Vapor Phase (60 seconds) ..................215
Infrared (15 seconds) .................... 220
Storage Temperature ............... −65 to +150


Description

The LM78 is a highly integrated Data Acquisition system for hardware monitoring of servers, Personal Computers, or virtually any microprocessor based system. In a PC, the LM78 can be used to monitor power supply voltages, temperatures, and fan speeds. Actual values for these inputs can be read at any time, and programmable WATCHDOG limits in the LM78 activate a fully programmable and maskable interrupt system with two outputs.

The LM78 has an on-chip temperature sensor, 5 positive analog inputs, two inverting inputs (for monitoring negative voltages), and an 8-bit ADC. An input is provided for the overtemperature outputs of additional temperature sensors and this is linked to the interrupt system. The LM78 provides inputs for three fan tachometer outputs. Additional inputs are provided for Chassis Intrusion detection circuits, VID monitor inputs, and chainable interrupt. The LM78 provides both ISA and Serial Bus interfaces. A 32-byte auto-increment RAM is provided for POST (Power On Self Test) code storage.