Features: Fully differential amplification Internal-gain-setting resistorsAvailable in space-saving packages micro SMD, MSOP and LLPUltra low current shutdown modeCan drive capacitive loads up to 500 pFImproved pop & click circuitry eliminates noises during turn-on and turn-off transitions 2....
LM4895: Features: Fully differential amplification Internal-gain-setting resistorsAvailable in space-saving packages micro SMD, MSOP and LLPUltra low current shutdown modeCan drive capacitive loads up to 5...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Supply Voltage ..............................................6.0V
Storage Temperature ............−65°C to +150°C
Input Voltage........................ −0.3V to VDD +0.3V
Power Dissipation (Note 3) .......Internally Limited
ESD Susceptibility (Note 4) .........................2000V
ESD Susceptibility (Note 5) ...........................200V
Junction Temperature............................... 150°C
Thermal Resistance
JC (LD) ...................................................12°C/W
JA (LD) .................................................63°.C/W
JA (micro SMD)..................................... 220°C/W
JC (MSOP).............................................. 56°C/W
JA (MSOP)............................................ 190°C/W
Soldering Information
See AN-1112 'microSMD Wafers Level Chip Scale
Package'.
See AN-1187 'Leadless
Leadframe Package (LLP)'.
Power@ 4Ohms, 1% THD | 1.4 Watt |
Power@ 8Ohms, 1% THD | 1 Watt |
Power@ 4Ohms, 10% THD | 1.9 Watt |
Power@ 8Ohms, 10% THD | 1.2 Watt |
THD | 0.1 % |
PSRR | 80 dB |
SNR | 98 dB |
CMRR | 50 dB |
Channels | 1 Channels |
Supply Range | +2.2 - +5.5 V |
THD Conditions | Po=.4Wrms@Vs=5V, R=8ohms |
User Supply | 5 Volt |
Shutdown Type | High/Low Selectable |
Temperature Min | -40 deg C |
Temperature Max | 85 deg C |
View Using Catalog |
The LM4895 is a fully differential audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1 watt of continuous average power to an 8Ω load with less than 1% distortion (THD+N) from a 5VDC power supply. Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components.
The LM4895 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement. The LM4895 features a low-power consumption shutdown mode. To facilitate this, Shutdown may be enabled by either logic high or low depending on mode selection.
Driving the shutdown mode pin either high or low enables the shutdown select pin to be driven in a likewise manner to enable Shutdown. Additionally, the LM4895 features an internal thermal shutdown protection mechanism. The LM4895 contains advanced pop & click circuitry which eliminates noises which would otherwise occur during turn-on and turn-off transitions. The LM4895 has an internally fixed gain of 6dB.