Features: · Available in space-saving packages micro SMD, MSOP and SOIC· Ultra low current shutdown mode· Can drive capacitive loads up to 500 pF· Improved pop & click circuitry eliminates noises during turn-on and turn-off transitions· 2.0 - 5.5V operation· No output coupling capacitors, snub...
LM4890: Features: · Available in space-saving packages micro SMD, MSOP and SOIC· Ultra low current shutdown mode· Can drive capacitive loads up to 500 pF· Improved pop & click circuitry eliminates noise...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Power@ 8Ohms, 1% THD | 1 Watt |
Power@ 8Ohms, 10% THD | 1.2 Watt |
THD | 0.1 % |
PSRR | 62 dB |
SNR | 105 dB |
Channels | 1 Channels |
Supply Range | +2.0 - +5.5 V |
THD Conditions | Po=.4Wrms@Vs=5 |
PSRR Conditions | f = 1kHz |
User Supply | 5 Volt |
Shutdown Type | Low |
Temperature Min | -40 deg C |
Temperature Max | 85 deg C |
View Using Catalog |
The LM4890 is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication device applications. It is capable of delivering 1 watt of continuous average power to an 8W BTL load with less than 1% distortion (THD+N) from a 5VDC power supply.
Boomer audio power amplifiers were designed specifically to provide high quality output power with a minimal amount of external components. The LM4890 does not require output coupling capacitors or bootstrap capacitors, and therefore is ideally suited for mobile phone and other low voltage applications where minimal power consumption is a primary requirement.
The LM4890 features a low-power consumption shutdown mode, which is achieved by driving the shutdown pin with logic low. Additionally, the LM4890 features an internal thermal shutdown protection mechanism.
The LM4890 contains advanced pop & click circuitry which eliminates noises which would otherwise occur during turn-on and turn-off transitions.
The LM4890 is unity-gain stable and can be configured by external gain-setting resistors.