LM4830

If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications.
Supply Voltage ..................................................6.0V
Storage Temperature ................−65°C to +150°C
Input Voltage ..........................−0.3V to VDD + 0.3V
Power Dissipation (Note 3).......... Internally Limited
ESD Susceptibility (Note 4) ............................2000V
ESD Susceptibility (Note 5).............................. 250V
Junction Temperature ..................................150°C
Soldering Information
Small Outline Package
Vapor Phase (60 sec.) .................................215°C
Infrared (15 sec.) ........................................220°C
See AN-450 "Surface Mounting and their Effects on Product Reliability" for other methods of soldering surface mount devices.

The LM4830 is an integrated solution for two-way audio amplification. It contains a bridge-connected audio power amplifier capable of delivering 1W of continuous average power to an 8W load with less than 1% THD from a 5V power supply. It also has the capability of driving 100 mW into a single-ended 32W impedance for headset operation. There is a 30 dB attenuator in front of a bridged power amplifier with 6 dB of gain. The attenuation is controlled through 4 bits of parallel digital control; 15 steps of 2 dB each.

The device also contains a microphone preamp with two selectable inputs. Mic2 is selected when HS is high and A1 is in single-ended mode. Mic1 is selected when HS is low and A1 is in bridged mode. This configuration is optimum for switching between an internal system speaker and external headset with microphone. The device also incorporates a buffer used for driving capacitive loads.

The LM4830 also provides a low-current consumption shutdown mode making it optimally suited for low-power portable systems. In addition, the device has an internal thermal shutdown protection mechanism.