Features: No output filter required for inductive transducers
Selectable gain of 6dB (2V/V) or 12dB (4V/V)
Very fast turn on time: 5ms (typ)
User selectable shutdown High or Low logic level
Minimum external components
"Click and pop" suppression circuitry
Micro-power shutdown mode
Short circuit protection
micro SMD, LLP, and MSOP packages (no heat sinkrequired)ApplicationMobile phones
PDAs
Portable electronic devicesSpecifications
| Power@ 4Ohms, 1% THD |
1 Watt |
| Power@ 8Ohms, 1% THD |
0.6 Watt |
| Power@ 4Ohms, 10% THD |
2.4 Watt |
| Power@ 8Ohms, 10% THD |
1.5 Watt |
| THD |
0.5 % |
| PSRR |
52 dB |
| Channels |
1 Channels |
| THD Conditions |
Po=0.1W @ Vs=3V |
| PSRR Conditions |
f=217Hz, Vripple=100Vrms |
| User Supply |
5 Volt |
| Shut down |
Yes |
| Mono/Stereo |
Mono |
| Shutdown Type |
High/Low Selectable |
| Supply Range |
+2.7 - +5.5 V |
| Temperature Min |
-40 deg C |
| Temperature Max |
85 deg C |
| View Using Catalog |
DescriptionThe LM4665 is a fully integrated single-supply high efficiency switching audio amplifier. It features an innovative modulator that eliminates the LC output filter used with typical switching amplifiers. Eliminating the output filter reduces parts count, simplifies circuit design, and reduces board area. The LM4665 processes analog inputs with a delta-sigma modulation technique that lowers output noise and THD when compared to conventional pulse width modulators.
The LM4665 is designed to meet the demands of mobile phones and other portable communication devices. Operating on a single 3V supply, it is capable of driving 8 transducer loads at a continuous average output of 400mW with less than 2%THD+N.
The LM4665 has high efficiency with an 8 transducer load compared to a typical Class AB amplifier. With a 3V supply, the IC's efficiency for a 100mW power level is 75%, reaching 80% at 400mW output power.
The LM4665 features a low-power consumption shutdown mode. Shutdown may be enabled by either a logic high or low depending on the mode selection. Connecting the Shutdown Mode pin to either VDD (high) or GND (low) enables the Shutdown pin to be driven in a likewise manner to activate shutdown.
The LM4665 has fixed selectable gain of either 6dB or 12dB. The LM4665 has short circuit protection against a short from the outputs to VDD, GND or across the outputs.
Reliability Metrics
| Part Number |
Process |
EFR Reject |
EFR Sample Size |
PPM |
LTA Rejects |
LTA Device Hours |
FITS |
MTTF (Hours) |
| LM4665ITL |
CMOS7 |
0 |
16561 |
0 |
0 |
954000 |
4 |
270700104 |
| LM4665ITLX |
CMOS7 |
0 |
16561 |
0 |
0 |
954000 |
4 |
270700104 |
| LM4665LD |
CMOS7 |
0 |
16561 |
0 |
0 |
954000 |
4 |
270700104 |
| LM4665LDX |
CMOS7 |
0 |
16561 |
0 |
0 |
954000 |
4 |
270700104 |
Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.For more information on Reliability Metrics, please click here.
LM4665 Data Sheet
