Features: Output voltage initial accuracy 0.1% Low temperature coefficient 75 ppm/°C Low Supply Current, 60 µA Enable pin allowing a 3 µA shutdown mode Up to 20 mA output current Voltage options 1.8V, 2.048V, 2.5V, 3.0V, 3.3V, 4.096V Custom voltage options available (1.8V to 4.096V) V...
LM4128: Features: Output voltage initial accuracy 0.1% Low temperature coefficient 75 ppm/°C Low Supply Current, 60 µA Enable pin allowing a 3 µA shutdown mode Up to 20 mA output current Voltag...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Initial Accuracy (+/-) Max | 0.2, 1, 0.1, 0.5 % |
Reference Voltage | 1.8 V, 2.5 V, 3 V, 4.096 V, 2.048 V, 1.024 V, 3.3 V |
Tempco, max (ppm/C) | 100, 75 ppm |
Input Min Voltage | 3.4, 4.496, 3.7, 2.2, 2.448, 2.9 Volt |
Input Max Voltage | 5.5 Volt |
Dropout Voltage | 0.4 Volt |
Quiescent Current | 0.06, 0.1 mA |
Output Current | 20 mA |
Voltage Noise (rms) | 170 uV |
Long Term Stability (ppm/1000hr) | 50 ppm |
Temperature Min | -40 deg C |
Temperature Max | 125 deg C |
AEC Q-100 Automotive Grade | 1 |
Automotive Selection Guide | Yes |
PowerWise | No, Yes |
View Using Catalog |
Ideal for space critical applications, the LM4128 precision voltage reference is available in the SOT-23 surface-mount package. The LM4128's advanced design eliminates the need for an external stabilizing capacitor while ensuring stability with capacitive loads up to 10 µF, thus making the LM4128 easy to use.
Series references provide lower power consumption than shunt references, since they do not have to idle the maximum possible load current under no load conditions. This advantage, the low quiescent current (60 µA), and the low dropout voltage (400 mV) make the LM4128 ideal for battery-powered solutions.
The LM4128 is available in four grades (A, B, C, and D) for greater flexibility. The best grade devices (A) have an initial accuracy of 0.1% with guaranteed temperature coefficient of 75 ppm/°C or less, while the lowest grade parts (D) have an initial accuracy of 1.0% and a tempco of 100 ppm/°C.