Features: Easy to use control methodology 0.8V to VIN adjustable output rangeHigh Efficiency (90% typical)±0.9% (±1.5% over temp) feedback voltage100% duty cycle capableMaximum operating frequency up to 2MHz Internal Soft-Start Enable pinSOT23-5 packageApplication TFT Monitor Auto PCVehicle Secur...
LM3485: Features: Easy to use control methodology 0.8V to VIN adjustable output rangeHigh Efficiency (90% typical)±0.9% (±1.5% over temp) feedback voltage100% duty cycle capableMaximum operating frequency ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Output Current | 4000 mA |
Input Min Voltage | 4.5 Volt |
Input Max Voltage | 35 Volt |
Output Range | 1.242V to Vin |
Frequency Min | 0 kHz |
Frequency Max | 1400 kHz |
Feedback Voltage | 1.27 Volt |
Feedback Tolerance | 2 % |
Efficiency (peak) | 93 % |
Adj Switch Frequency | Yes |
Adjustable Output | Yes |
Synchronous Rectification | No |
On/Off Pin | No |
Error Flag | No |
SoftStart | No |
Sync Pin | No |
Inverting | No |
Flyback | No |
Lossless Current Sense | Yes |
RegType | Switching Controller |
Temperature Min | -40 deg C |
Temperature Max | 125 deg C |
Channels | 1 Channels |
Special Features | No compensation required; Current limit; PFET controller |
Topology | Buck |
PWM Mode | Hysteretic |
Step-Down | Yes |
Step-Up | No |
Output Min | 1.242 Volt |
Automotive Selection Guide | Yes |
View Using Catalog |
VIN PGATE FB EN Storage Temperature Power Dissipation (Note 2) ESD Susceptibilty Human Body Model (Note 3) Lead Temperature Vapor Phase (60 sec.) Infared (15 sec.) |
−0.3V to 16V −0.3V to 16V −0.3V to 5V −0.3V to 16V −65°C to 150°C 440mW 2.5kV 215°C 220°C |
The LM3485 is a hysteretic P-FET buck controller designed to support a wide range of high efficiency applications in very small SOT23-5 package. The hysteretic control scheme has several advantages, including simple system design with no external compensation, stable operation with a wide range of components, and extremely fast transient response. Hysteretic control also provides high efficiency operation, even at light loads. The PFET architecture allows for low component count as well as 100% duty cycle and ultralow dropout operation.