Features: Fully specified for operation over -40 to +125 Output current in excess of 500 mA (400mA for SOT-223 package) Output trimmed for 5% tolerance under all operating conditions Wide output capacitor ESR range, 0.01up to 5 Internal short circuit and thermal overload protection Reverse batt...
LM2937-3.3: Features: Fully specified for operation over -40 to +125 Output current in excess of 500 mA (400mA for SOT-223 package) Output trimmed for 5% tolerance under all operating conditions Wide output c...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Fully specified for operation over -40 to +125
Output current in excess of 500 mA (400mA for SOT-223 package)
Output trimmed for 5% tolerance under all operating conditions
Wide output capacitor ESR range, 0.01up to 5
Internal short circuit and thermal overload protection
Reverse battery protection
60V input transient protection
Mirror image insertion protection
Input Voltage
Continuous 26V
Transient (t 100 ms) 60V
Internal Power Dissipation (Note 2) Internally Limited
Maximum Junction Temperature150
Storage Temperature Range -65 to +150
Lead Temperature Soldering
TO-220 (10 seconds) 260
TO-263 (10 seconds) 230
SOT-223 (Vapor Phase, 60 seconds) 215
SOT-223 (Infrared, 15 seconds) 220
ESD Susceptibility (Note 3) 2 kV
Output Current | 400, 500 mA |
Output Min | 3.3 Volt |
Input Min Voltage | 4.75 Volt |
Input Max Voltage | 26 Volt |
Adjustable Output | No |
Quiescent Current | 2 mA |
On/Off Pin | No |
Error Flag | No |
RegType | LDO |
Temperature Min | -40 deg C |
Temperature Max | 85, 125 deg C |
Output Max | 3.3 Volt |
Output Voltage | 3.3 Volt |
View Using Catalog |
The LM2937-2.5 and LM2937-3.3 are positive voltage regulators capable of supplying up to 500 mA of load current. Both regulators are ideal for converting a common 5V logic supply, or higher input supply voltage, to the lower 2.5V and 3.3V supplies to power VLSI ASIC's and microcontrollers. Special circuitry has been incorporated to minimize the quiescent current to typically only 10 mA with a full 500 mA load current when the input to output voltage differential is greater than 5V.
The LM2937 requires an output bypass capacitor for stability. As with most regulators utilizing a PNP pass transistor, the ESR of this capacitor remains a critical design parameter, but the LM2937-2.5 and LM2937-3.3 include special compensation circuitry that relaxes ESR requirements. The LM2937 is stable for all ESR ratings less than 5. This allows the use of low ESR chip capacitors.
The regulators are also suited for automotive applications, with built in protection from reverse battery connections, two-battery jumps and up to +60V/-50V load dump transients. Familiar regulator features such as short circuit and thermal shutdown protection are also built in.
Reliability Metrics
Part Number | Process | EFR Reject | EFR Sample Size | PPM | LTA Rejects | LTA Device Hours | FITS | MTTF (Hours) |
LM2937ES-3.3 | SLM | 0 | 42786 | 0 | 0 | 3352500 | 2 | 951281028 |
LM2937ESX-3.3 | SLM | 0 | 42786 | 0 | 0 | 3352500 | 2 | 951281028 |
LM2937ET-3.3 | SLM | 0 | 42786 | 0 | 0 | 3352500 | 2 | 951281028 |
LM2937IMP-3.3 | SLM | 0 | 42786 | 0 | 0 | 3352500 | 2 | 951281028 |
LM2937IMPX-3.3 | SLM | 0 | 42786 | 0 | 0 | 3352500 | 2 | 951281028 |