LM2574HV

Features: *3.3V, 5V, 12V, 15V, and adjustable output versions* Adjustable version output voltage range, 1.23V to 37V (57V for HV version) ±4% max over line and load conditions* Guaranteed 0.5A output current* Wide input voltage range, 40V, up to 60V for HV version* Requires only 4 external compone...

product image

LM2574HV Picture
SeekIC No. : 004394880 Detail

LM2574HV: Features: *3.3V, 5V, 12V, 15V, and adjustable output versions* Adjustable version output voltage range, 1.23V to 37V (57V for HV version) ±4% max over line and load conditions* Guaranteed 0.5A outpu...

floor Price/Ceiling Price

Part Number:
LM2574HV
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/12/25

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

*3.3V, 5V, 12V, 15V, and adjustable output versions
* Adjustable version output voltage range, 1.23V to 37V (57V for HV version) ±4% max over line and load conditions
* Guaranteed 0.5A output current
* Wide input voltage range, 40V, up to 60V for HV version
* Requires only 4 external components
* 52 kHz fixed frequency internal oscillator
* TTL shutdown capability, low power standby mode
* High efficiency
* Uses readily available standard inductors
* Thermal shutdown and current limit protection





Application

Simple high-efficiency step-down (buck) regulator
Efficient pre-regulator for linear regulators
On-card switching regulators
Positive to negative converter (Buck-Boost)





Pinout

  Connection Diagram




Specifications

Output Current 500 mA
Input Min Voltage 4 Volt
Input Max Voltage 60 Volt
Output Min 3.3, 1.23, 12, 5, 15 Volt
Output Max 57, 3.3, 12, 5, 15 Volt
Frequency Min 52 kHz
Frequency Max 52 kHz
Efficiency (peak) 77, 88, 72 %
On/Off Pin Yes
Error Flag No
SoftStart No
Sync Pin No
Inverting Yes
Flyback No
RegType Switching Regulator
Temperature Min -40 deg C
Temperature Max 125 deg C
Adjustable Output Yes, No
Adj Switch Frequency No
PWM Mode Voltage
Topology Buck
Special Features SIMPLE SWITCHER regulator
Step-Down Yes
Multiple Output Capability No
Output Power Undefined Watt
Output Voltage 3.3, Undefined, 12, 5, 15 Volt
Output Range 15V, 5V, 12V, 3.3V, 1.23V to 57V
Switching Frequency 52 kHz
Regulator Family SIMPLE SWITCHER
AEC Q-100 Automotive Grade Undefined
Synchronous Rectification No
View Using Catalog


If Military/Aerospace specified devices are required,pleasecontacttheNationalSemiconductorSalesOffice/Distributors for availability and specifications.

LM2574 45V
LM2574HV 63V
ON /OFF Pin Input Voltage -0.3V V +VIN
Output Voltage to Ground
(Steady State) -1V
Minimum ESD Rating
(C = 100 pF, R = 1.5 k) 2kV
Storage Temperature Range -65 to +150
Lead Temperature
(Soldering, 10 seconds) 260
Maximum Junction Temperature 150
Power Dissipation Internally Limited






Description

The LM2574HV series of regulators are monolithic integrated circuits that provide all the active functions for a step-down (buck) switching regulator, capable of driving a 0.5A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3V, 5V, 12V, 15V, and an adjustable output version.

Requiring a minimum number of external components, these regulators are simple to use and include internal frequency compensation and a fixed-frequency oscillator.

The LM2574HV series offers a high-efficiency replacement for popular three-terminal linear regulators. Because of its high efficiency, the copper traces on the printed circuit board are normally the only heat sinking needed.

A standard series of inductors optimized for use with the LM2574 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies.

Other features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring 50 µA (typical) standby current. The output switch includes cycle-by-cycle current limiting, as well as thermal shutdown for full protection under fault conditions.

Reliability Metrics


Part Number Process EFR Reject EFR Sample Size PPM LTA Rejects LTA Device Hours FITS MTTF (Hours)
LM2574HV-5 MDC SLM 0 42786 0 0 3352500 2 951281028
LM2574HV-5 MWC SLM 0 42786 0 0 3352500 2 951281028
LM2574HVM-12 SLM 0 42786 0 0 3352500 2 951281028
LM2574HVM-15 SLM 0 42786 0 0 3352500 2 951281028
LM2574HVM-3.3 SLM 0 42786 0 0 3352500 2 951281028
LM2574HVM-5.0 SLM 0 42786 0 0 3352500 2 951281028
LM2574HVM-ADJ SLM 0 42786 0 0 3352500 2 951281028
LM2574HVMX-12 SLM 0 42786 0 0 3352500 2 951281028
LM2574HVMX-15 SLM 0 42786 0 0 3352500 2 951281028
LM2574HVMX-3.3 SLM 0 42786 0 0 3352500 2 951281028
LM2574HVMX-5.0 SLM 0 42786 0 0 3352500 2 951281028
LM2574HVMX-ADJ SLM 0 42786 0 0 3352500 2 951281028
LM2574HVN-12 SLM 0 42786 0 0 3352500 2 951281028
LM2574HVN-15 SLM 0 42786 0 0 3352500 2 951281028
LM2574HVN-3.3 SLM 0 42786 0 0 3352500 2 951281028
LM2574HVN-5.0 SLM 0 42786 0 0 3352500 2 951281028
LM2574HVN-ADJ SLM 0 42786 0 0 3352500 2 951281028

Note: The Early Failure Rates (EFR) were calculated as point estimate PPM based on rejects and sample size for EFR. The Long Term Failure Rates were calculated at 60% confidence using the Arrhenius equation at 0.7eV activation energy and derating the assumed stress temperature of 150°C to an application temperature of 55°C.

For more information on Reliability Metrics, please click here.


Application Notes


Title Size in Kbytes Date
AN-1061: Application Note 1061 Power Conversion in Line-Powered Equipment 162 Kbytes 1-Oct-02 Download
AN-1061 (Japanese): Application Note 1061 Power Conversion in Line-Powered Equipment
640){this.height=this.height*640/this.width;this.width=640;}' border="0" alt=" Connection Diagram">
215 Kbytes

If you have trouble printing or viewing PDF file(s), see Printing Problems.






Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
Connectors, Interconnects
Cables, Wires - Management
Crystals and Oscillators
Discrete Semiconductor Products
Test Equipment
Sensors, Transducers
View more