LM193A

•Wide single supply voltage range 2.0VDC to 36VDC or dual supplies ±1.0VDC, to ±18VDC
•Very low supply current drain (0.8mA) independent of supply voltage (2.0mW/comparator at 5.0VDC)
•Low input biasing current 25nA
•Low input offset current ±5nA and offset voltage ±2mV
•Input common-mode voltage range includes ground
•Differential input voltage range equal to the power supply voltage
•Low output 250mV at 4mA saturation voltage
•Output voltage compatible with TTL, DTL, ECL, MOS and CMOS logic systems

•A/D converters
•Wide range VCO
•MOS clock generator
•High voltage logic gate
•Multivibrators

The LM193A series consists of two independent precision voltage comparators with an offset voltage specification as low as 2.0mV max. for two comparators which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current drain is independent of the magnitude of the power supply voltage. These comparators also have a unique characteristic in that the input common-mode voltage range includes ground, even though operated from a single power supply voltage.

The LM193A series was designed to directly interface with TTL and CMOS. When operated from both plus and minus power supplies, the LM193 series will directly interface with MOS logic where their low power drain is a distinct advantage over standard comparators.