Features: n I2C compatible microcontroller interfacen Internal OSD generator with 16 sets of color iconsn OSD override allows OSD messages to be displayed while blanking input videon Internally generated burn-in screenn 4 DAC outputs (8-bit resolution) for bus controlled CRT bias and brightnessn S...
LM1238: Features: n I2C compatible microcontroller interfacen Internal OSD generator with 16 sets of color iconsn OSD override allows OSD messages to be displayed while blanking input videon Internally gene...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
n I2C compatible microcontroller interface
n Internal OSD generator with 16 sets of color icons
n OSD override allows OSD messages to be displayed while blanking input video
n Internally generated burn-in screen
n 4 DAC outputs (8-bit resolution) for bus controlled CRT bias and brightness
n Spot killer which blanks the video outputs when VCC falls below the specified threshold
n Suitable for use with discrete or integrated clamp, with software configurable brightness mixer
n H and V blanking (V blanking is optional and has register programmable width)
n Power Saving Mode with 65% power reduction
n Matched to LM246x driver and 2479/80 clamp
n Low end 15" and 17" bus controlled monitors with OSD
n 1024x768 displays up to 85 Hz requiring OSD capability
n Very low cost systems with LM246x driver
Supply Voltage, Pins 15 and 19 6.0V
Peak Video DC Output Source Current
(Any One Amp) Pins 18, 19 or 20 1.5 mA
Voltage at Any Input Pin (VIN) VCC +0.5 > VIN >−0.5V
Thermal Resistance to Ambient (JA) 51°C/W
Power Dissipation (PD)
(Above 25°C Derate Based
on JA and TJ) 2.4W
Thermal Resistance to case (JC) 32°C/W
Junction Temperature (TJ) 150°C
ESD Susceptibility (Note 4) 3.5 kV
Video Inputs 0.0VPP < VIN < 1.2VPP
ESD Machine Model (Note 13) 350V
Storage Temperature −65°C to +150°C
Lead Temperature (Soldering, 10 sec.) 265°C
Operating Ratings (Note 2)
Ambient Temperature 0°C to +70°C
Range
Supply Voltage VCC 4.75V < VCC < 5.25V
Video Inputs 0 < Vin 1.0 VP-P
The LM1238 pre-amp is an integrated, three channel video pre-amp. It has an I2C compatible interface which allows control of all the parameters necessary to directly setup and adjust the gain and contrast in the CRT display. Four I2C compatible DACs are available to control monitor bias and brightness circuits. The LM1238 preamp is designed to be 100% compatible with the LM246x high gain driver family and the LM2479/80 Clamp ICs.
Black level clamping of the video signal is carried out directly on the AC coupled input signal into the high impedance pre-amplifier inputs, eliminating the need for additional clamp capacitors. Horizontal and vertical blanking of the outputs is provided. Vertical blanking is optional and its duration is register programmable.