LM1201

The LM1201 is a wideband video amplifier system intended for high resolution monochrome or RGB monitor applications.The features of it are as follows:(1)wideband video amplifier (200 MHz @ -3 dB); (2)attenuator circuit for contrast control(>40 dB range); (3)externally gated comparator for brightness control; (4)provisions for external gain set and peaking of video amplifier; (5)video input voltage reference; (6)Low impedance output driver.

What comes next is the maximum ratings of LM1201: (1)supply voltage VCC pins 10, 12, 15 to ground pins, 1, 7: 13.5V; (2)voltage at any input pin (VIN): VCC   VIN   GND; (3)video output current (I8): 28 mA; (4)package power dissipation at TA = 25(above 25 derate based on (JA and TJ): 1.56W; (5)package thermal resistance (JA) N16E: 80/W; (6)package thermal resistance (JA) M16A: 100/W; (7)Junction temperature (TJ): 150; (8)storage temperature range (TSTG): -65 to +150; (9)lead temperature (soldering, 10 sec.): 265; (10)ESD susceptibility: 2 kV; (11)human body model: 100 pF discharged through a 1.5 k resistor.

The following is the electrical characteristics of LM1201: (1)supply current: 45mA typical and 57mA max at VCC pins 12, 15 Only; (2)video input reference voltage: 2.65V typical, 2.4V min and 2.95V max; (3)video input bias current: 5.0A typical and 20A max at (V3 - V16)/10 k; (4)clamp gate low input voltage: 1.2V typical and 0.8V min at clamp comparator on; (5)clamp gate high input voltage:1.6V typical and 2.0V max at clamp comparator off; (6)clamp gate low input current: -0.5A typical and -5.0A max at V5 = 0V; (7)clamp gate high input current: 0.005A typical and 1A max at V5 = 12V; (8)clamp cap charge current: 1mA typical and 0.55mA min at V2 = 0V.