LM10

input offset voltage: 2.0 mV (max)
input offset current: 0.7 nA (max)
input bias current: 20 nA (max)
reference regulation: 0.1% (max)
offset voltage drift: 2V/
reference drift: 0.002%/

LM10/LM10B/ LM10BL/
LM10C LM10CL
Total Supply Voltage...........................................................................................45V 7V
Differential Input Voltage (Note 2) ....................................................................±40V±7V
Power Dissipation (Note 3).................................................................................internally limited
Output Short-circuit Duration (Note 4)........................................................................ continuous
Storage-Temp.......................................................................................... Range −55°C to +150°C
Lead Temp. (Soldering, 10 seconds)
Metal Can ........................................................................................................................300°C
Lead Temp. (Soldering, 10 seconds) DIP .........................................................................260°C
Vapor Phase (60 seconds) ...............................................................................................215°C
Infrared (15 seconds)....................................................................................................... 220°C

The LM10 series are monolithic linear ICs consisting of a precision reference, an adjustable reference buffer and an independent, high quality op amp.

The unit can operate from a total supply voltage as low as 1.1V or as high as 40V, drawing only 270A. A complementary output stage swings within 15 mV of the supply terminals or will deliver ±20 mA output current with ±0.4V saturation. Reference output can be as low as 200 mV.

The circuit is recommended for portable equipment and is completely specified for operation from a single power cell. In contrast, high output-drive capability, both voltage and current, along with thermal overload protection, suggest it in demanding general-purpose applications.

The LM10 is capable of operating in a floating mode, independent of fixed supplies. It can function as a remote comparator, signal conditioner, SCR controller or transmitter for analog signals, delivering the processed signal on the same line used to supply power. It is also suited for operation in a wide range of voltage- and current-regulator applications, from low voltages to several hundred volts, providing greater precision than existing ICs.

LM10 is available in the three standard temperature ranges, with the commercial part having relaxed limits. In addition, a low-voltage specification (suffix "L") is available in the limited temperature ranges at a cost savings.