LIS3L06AL

Digital Output - Number of Bits :
Sensing Axis : X, Y, Z
Supply Voltage - Max : 3.6 V
Maximum Operating Temperature : + 85 C
Minimum Operating Temperature : - 40 C
Packaging : Tray
Supply Voltage - Min : 2.4 V
Output Type : Analog - Voltage
Acceleration : 2 g, 6 g
Sensitivity : 500 mV/g, 15000 mV/g
Package / Case : LGA-8
Supply Current : 0.95 mA


Features:

·2.4V TO 3.6V SINGLE SUPPLY OPERATIO
· LOW POWER CONSUMPTION
· ±2g/±6g USER SELECTABLE FULL-SCAL
· 0.5mg RESOLUTION OVER 100Hz BANDWIDTH
· EMBEDDED SELF TEST
· OUTPUT VOLTAGE, OFFSET AND SENSITIVITY RATIOMETRIC TO THE SUPPLY VOLTAGE
· HIGH SHOCK SURVIVABILITY
· ECO-PACK COMPLIANT


Pinout




Specifications

Stresses above those listed as "absolute maximum ratings" may cause permanent damage to  the device. This is a stress rating only and functional operation of the device under these  conditions is not implied. Exposure to maximum rating conditions for extended periods may  affect device reliability.

Symbol	Ratings	Maximum Value	Unit
Vdd	Supply voltage	-0.3 to 7	V
Vin	Input Voltage on Any Control pin (FS, PD, ST)	-0.3 to Vdd +0.3	V
APOW	Acceleration (Any axis, Powered, Vdd=3.3V)	3000g for 0.5 ms
		10000g for 0.1 ms
AUNP	Acceleration (Any axis, Not powered)	3000g for 0.5 ms
		10000g for 0.1 ms
TSTG	Storage Temperature Range	-40 to +125
ESD	Electrostatic Discharge Protection	2KV HBM
		200V MM
		1500V CDM

 

Description

The LIS3L06AL is a low-power 3-axis linear capacitive accelerometer that includes a sensing element and an IC interface able to take the information from the sensing element and to provide an analog signal to the external world.

The sensing element, capable of detecting the acceleration, is manufactured using a dedicated process developed by ST to produce inertial sensors and actuators in silicon.

The IC interface is manufactured using a standard CMOS process that allows high level of integration to design a dedicated circuit which is trimmed to better match the sensing element characteristics.

The LIS3L06AL has a dynamically selectable full scale of ±2g/±6g and it is capable of measuring accelerations over a bandwidth of 1.5 kHz for all axes. The device bandwidth may be reduced by using external capacitances. A self-test capability allows to check the mechanical and electrical signal path of the sensor.

The LIS3L06AL is available in plastic SMD package and it is guaranteed to operate over an extended temperature range of -40°C to +85°C.

The LIS3L06AL belongs to a family of products suitable for a variety of applications:
    Mobile terminals
    Gaming and Virtual Reality input devices
    Free-fall detection for data protection
    Antitheft systems and Inertial Navigation
    Appliance and Robotics.

Parameters:

Technical/Catalog Information	LIS3L06AL
Vendor	STMicroelectronics
Category	Sensors, Transducers
Acceleration Range	±2g, 6g
Voltage Rating	2.7 ~ 3.3VDC
Sensitivity	220/660mV/g
Features	High Shock Survivability
Package / Case	8-LGA
Axis	Three
Interface	Analog
Lead Free Status	Lead Free
RoHS Status	RoHS Compliant
Other Names	LIS3L06AL LIS3L06AL 497 4918 ND 4974918ND 497-4918