Control Voltage Range
:
Product Type
: PCB Mount
Mounting Style
: SMD/SMT
Output Device
: MOSFET
Load Voltage Rating
: 350 V
Contact Form
: 2 Form A (DPST-NO)
Package / Case
: SOP-8
Load Current Rating
: 0.12 A
Features: • Two Independent Relays in a Single Package
• Package- FLAT PAK
• l/O Isolation, 3000 V RMS
• Solid-state Relay (Equivalent to AQW210S)
Typical R ON 20 Load Voltage 350 V
Load Current 120 mA
Current Limit Protection
High Surge Capability
Linear, AC/DC Operation
Clean Bounce Free Switching
Low Power Consumption
High Reliability Monolithic ReceptorApplication• General Telecom Switching
On/off Hook Control
Ring Relay
Ground Start
• Industrial Controls
Triac Predriver
Output Modules
• Peripherals
Transducer Driver
• Instrumentation
Automatic Tuning/Balancing
Flying Capacitor
Analog Multiplexing
• See Application Note 56SpecificationsAbsolute Maximum Ratings, T A =25 ° C
Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Ratings for extended periods of time can adversely affect reliability.
Package Ambient Temperature Range .............40 to +85
Storage Temperature Range .........................40 to +125
Soldering Temperature (t=10 s max.)...........................260
Isolation Test Voltage (t=1.0 s) .................................3000 V
RMS Isolation Resistance
V IO =500 V, T A =25 ..................................... . 1012
V I O =500 V, T A =100 .................................. 1011
Total Power Dissipation ...........................................600 mW
SSR
LED Continuous Forward Current ...............................50 mA
LED Reverse Voltage ( I R 10 A).............................6.0 V
DC or Peak AC Load Voltage ( I L 50 A) .............. .350 V
Continous DC Load Current ..................................... 120 mA
DescriptionThe LH1532FPTR is a Dual 1 Form A (SPST) which can replace electromechanical relays in many applications. They are constructed using a GaAlAs LED for activation control and an integrated monolithic die for the switch output. The die is comprised of a photodiode array, switch control circuity and MOSFET switches. The SSR features low ON-resistance, high breakdown voltage and current-limit circuitry that protects the relay from telephone line induced lightning surges.
The LH1532FPTR comes in an 8 pin, 0.080 inch thick plastic Flat Pack: surface mount leads with100 mil spacing.
LH1532FPTR Data Sheet
