LF13006

If Military/Aerospace specified devices are required,please contact the National Semiconductor Sales ffice/Distributors for availability and specifications.
Supply Voltage, V⁺ to V^-                            36V
Supply Voltage, V⁺ to GND                        25V
Voltage at Any Digital Input             V⁺ to GND
Analog Voltage                          V⁺ to(V^- + 2V)

The LF13006 and LF13007 are precision digital gain sets used for accurately setting non-inverting op amp gains. Gains are set with a 3-bit digital word which can be latched  in with WR and CS pins. All digital inputs are TTL and CMOS compatible.

The LF13006 shown below will set binary scaled gains of 1, 2, 4, 8, 16, 32, 64, and 128. The LF13007 will set gains of 1, 2, 5, 10, 20, 50, and 100 (a common attenuator sequence). In addition, both versions have several taps and two uncom- mitted matching resistors that allow customization of the gain.

The gains are set with precision thin film resistors. The low temperature coefficient of the thin film resistors and their excellent tracking result in gain ratios which are virtually in-dependent of temperature.

The LF13006, LF13007 used in conjunction with an amplifi- er not only satisfies the need for a digitally programmable amplifier in microprocessor based systems, but is also use-ful for discrete applications, eliminating the need to find 0.5% resistors in the ratio of 100 to 1 which track each other over temperature.