Features: TYPICAL DROPOUT 1.3V (AT 5A) THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 1.5, 1.8V, 2.5V, 2.85V, 3.3V, 3.6V, 5V, 8V, 9V, 12V. GUARANTEED OUTPUT CURRENT UP TO 5A OUPUT TOLERANCE ±1% AT 25°C AND ±2% IN FULL TEMPERATURE RANGE INTERNAL POWER AND THERMAL LIMITWIDE OPERATING TEMPERATURE...
LD1084V15: Features: TYPICAL DROPOUT 1.3V (AT 5A) THREE TERMINAL ADJUSTABLE OR FIXED OUTPUT VOLTAGE 1.5, 1.8V, 2.5V, 2.85V, 3.3V, 3.6V, 5V, 8V, 9V, 12V. GUARANTEED OUTPUT CURRENT UP TO 5A OUPUT TOLERANCE ±1% ...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
Symbol |
Parameter² |
Value |
Unit |
VI |
DC Input Voltage |
30 |
V |
IO |
Output Current |
Internally Limited |
mA |
PD |
Power Dissipation |
Internally Limited |
mW |
Tstg |
Storage Temperature Range |
-55 to +150 |
°C |
Top |
Operating Junction Temperature Range |
-40 to +125 |
°C |
The LD1084V15 is a LOW DROP Voltage Regulator able to provide up to 5A of Output Current.
Dropout is guaranteed at a maximum of 1.5V at the maximum output current, decreasing at lower loads. The LD1084V15 is pin to pin compatible with the older 3-terminal adjustable regulators, but has better performances in term of drop and output tolerance .
A 2.85V output version is suitable for SCSI-2 active termination. Unlike PNP regulators, where a part of the output current is wasted as quiescent current, the LD1084 quiescent current flows into the load, so increase efficiency. Only a 10F minimum capacitor is need for stability.
The LD1084V15 is supplied in TO-220, D2PAK and D2PAK/A. On chip trimming allows the regulator to reach a very tight output voltage tolerance, within ±1% at 25°C.