Position: Home  > All Categories> Integrated Circuits (ICs) > LC875148A

LC875148A

Features: ` Read Only Memory - 65536 * 8 bits (LC875164A) - 49151 * 8 bits (LC875148A) - 32512 * 8 bits (LC875132A)` Bus Cycle Time -100ns (10MHz) Note: The bus cycle time indicates ROM read time.` Minimum Instruction Cycle Time : 300ns (10MHz)` Ports - Input/output portsEach bit data direction pr...

product image

LC875148A Picture
See larger image
SeekIC No. : 004392450 Detail

LC875148A: Features: ` Read Only Memory - 65536 * 8 bits (LC875164A) - 49151 * 8 bits (LC875148A) - 32512 * 8 bits (LC875132A)` Bus Cycle Time -100ns (10MHz) Note: The bus cycle time indicates ROM read time.` ...

LC875148A Data Sheet

floor Price/Ceiling Price

Get Latest Price
Part Number:
LC875148A
Supply Ability:
5000

Price Break

  • Qty
  • 1~5000
  • Unit Price
  • Negotiable
  • Processing time
  • 15 Days
Total Cost: $ 0.00

SeekIC Buyer Protection PLUS - newly updated for 2013!

  • Escrow Protection.
  • Guaranteed refunds.
  • Secure payments.
  • Learn more >>

Month Sales

268 Transactions

Rating

evaluate  (4.8 stars)

Upload time: 2024/11/21

add to my favourite

Payment Methods

All payment methods are secure and covered by SeekIC Buyer Protection PLUS.

Notice: When you place an order, your payment is made to SeekIC and not to your seller. SeekIC only pays the seller after confirming you have received your order. We will also never share your payment details with your seller.
Product Details

Description



Features:

` Read Only Memory
   - 65536 * 8 bits (LC875164A)
   - 49151 * 8 bits (LC875148A)
   - 32512 * 8 bits (LC875132A)
` Bus Cycle Time
   - 100ns (10MHz)
      Note: The bus cycle time indicates ROM read time.
` Minimum Instruction Cycle Time : 300ns (10MHz)
` Ports
   - Input/output ports
     Each bit data direction programmable 59 (P1n,P2n,P3n,P70 to P73,P8n,PAn,PBn,PCn,S2Pn)
     Nibble data direction programmable 8 (P0n)
   - Input ports 2 (XT1,XT2)
   - PWM Output ports 2 (PWM0,PWM1)
   - Oscillator pins 2 (CF1,CF2)
   - Reset pin 1 ( RES )
   - Power supply 6 (VSS1 to 3,VDD1 to 3)
` Timers
   - Timer0: 16 bit timer/counter with capture register
     Mode 0: 2 channel 8 bit timer with programmable 8 bit prescaler and 8 bit capture register
     Mode 1: 8 bit timer with 8 bit programmable prescaler and 8 bit capture register + 8 bit counter with 8 bit capture register
     Mode 2: 16 bit timer with 8 bit programmable prescaler and 16 bit capture register
     Mode 3: 16 bit counter with 16 bit capture register
   - Timer1: PWM/16 bit timer/counter (with toggle output)
     Mode 0: 8 bit timer (with toggle output) + 8 bit timer counter (with toggle output)
     Mode 1: 2 channel 8 bit PWM
     Mode 2: 16 bit timer/counter (with toggle output)
     Mode 3: 16 bit timer (with toggle output) Lower order 8 bits can be used as PWM output.
   - Timer4: 8-bit timer with 6-bit prescaler
   - Timer5: 8-bit timer with 6-bit prescaler
   - Base timer
     1. The clock signal can be selected from any of the following: sub-clock (32.768kHz crystal oscillator), system clock, and prescaler output for timer 0.
     2. Interrupts can be selected to occur at one of five different times.
`SIO
   - SIO0: 8 bit synchronous serial interface
     1. LSB first/MSB first function available
     2. Internal 8-bit baud-rate generator (maximum transmit clock period 4/3 TCYC)
     3. Continuous automatic data communications (1 - 256 bits)
   - SIO1: 8 bit asynchronous/synchronous serial interface
     Mode 0: Synchronous 8 bit serial IO (2-wire or 3-wire, transmit clock 2 - 512 TCYC)
     Mode 1: Asynchronous serial IO (half duplex, 8 data bits, 1 stop bit, baud rate 8 - 2048 TCYC)
     Mode 2: Bus mode 1 (start bit, 8 data bits, transmit clock 2 - 512 TCYC)
     Mode 3: Bus mode 2 (start detection, 8 data bits, stop detection)
   - SIO2: 8 bit synchronous serial interface
     1. LSB-first
     2. Built in 8-bit baud-rate generator (Maximum clock period 4/3 TCYC)
     3. Continuous automatic data communication (1 - 32 bytes)
` AD converter
   - 8-bits * 8-channels
` PWM
   - 2 channel synchronous variable 12 bit PWM
` Parallel interface
   - RS, RD , WR , CS0 - CS2 Outputs (reversible polarity)
   - read/write possible in 1 TCYC
` Remote control receiver circuit (connected to P73/INT3/T0IN terminal)
   - Noise rejection function (noise rejection filter time constant can selected from 1/32/128 TCYC)
` Watchdog timer
   - The watchdog timer period set by external RC.
   - Watchdog timer can be set to produce interrupt, system reset
`Interrupts
   - 19-source, 10-vectored interrupts:
    1. Three level (low, high and highest) multiple interrupts are supported. During interrupt handling, an equal or lower level interrupt request is refused.
    2. If interrupt requests to two or more vector addresses occur at once, the higher level interrupt takes precedence.
        In the case of equal priority levels, the vector with the lowest address takes precedence.
     • Priority Level : X > H > L
     • For equal priority levels, vector with lowest address takes precedence.
` Subroutine stack levels
   - 512 levels max. Stack is located in RAM
` Multiplication and division
   - 16 bit * 8 bit (executed in 5 cycles)
   - 24 bit * 16 bit (12 cycles )
   - 16 bit ÷ 8 bit (8 cycles)
   - 24 bit ÷ 16 bit (12 cycles)
` Oscillation circuits
   - On-chip RC oscillation circuit used for system clock
   - On-chip CF oscillation circuit used for system clock
   - On-chip Crystal oscillation circuit used for system clock and time-base clock
` Standby function
   - HALT mode
     HALT mode is used to reduce power consumption. Program execution is stopped. Peripheral circuits still operate.
     1. Oscillation circuits are not stopped automatically
     2. Release on system reset
   - HOLD mode
     HOLD mode is used to reduce the power dissipation. Both program execution and peripheral circuits are stopped.
     1. CF, RC and crystal oscillation circuits stop automatically
     2. Release occurs on any of the following conditions
         •input to the reset pin goes low
         •a specified level is input to at least one of INT0, INT1, INT2, INT4, INT5
         •an interrupt condition arises at port 0
   - X'tal HOLD mode
     X'tal HOLD mode is used to reduce power consumption. Program execution is stopped. All peripheral circuits except the base timer are stopped.
     1. CF and RC oscillation circuits stop automatically
     2. Crystal oscillator is maintained in its state at HOLD mode inception.
     3. Release occurs on any of the following conditions
         •input to the reset pin goes low
         •a specified level is input to at least one of INT0, INT1, INT2, INT4, INT5
         •an interrupt condition arises at port 0
         •an interrupt condition arises at the base-timer
` Factory shipment
   - delivery form QIP80E
   - delivery form SQFP80
`Development Tools
   - Evaluation chip : LC876099
   - Emulator : EVA87000 + ECB875100 (Evaluation chip board) + POD875100 (POD)


Pinout

Connection Diagram


Specifications

Parameter Symbol Pins Conditions  
Ratings
unit
VDD[V]
min.
typ
max.
Maximum
supply voltage		 VDD max VDD1,VDD2,VDD3 VDD1=VDD2=VDD3  
-0.3
+7.0
V
Input voltage VI(1) XT1, XT2, CF1    
-0.3
VDD+0.3
output voltage VO(1) PWM0, PWM1    
-0.3
VDD+0.3
Input/output
voltage		 VIO(1) Ports 0, 1, 2
Ports 3, 7, 8
Ports A, B, C
SI2P00-SI2P03
PWM0, PWM1		    
-0.3
VDD+0.3
High
level
output
current		 Peak
output
current		 IOPH(1) Ports 0, 1, 2, 3
Ports A, B, C
SI2P00-SI2P03
PWM0, PWM1		 •CMOS output
•For each pin.		  
-10
mA
IOPH(2) P71-P73 For each pin.  
-5
Total
output
current		 IOAH(1) P71-P73    
-5
IOAH(2) Port 1
PWM0, PWM1
Port 3
SI2P00-SI2P03		 The total of all pins.  
-30
IOAH(3) Ports 0, 2 The total of all pins.  
-20
IOAH(4) Ports B    
-20
IOAH(5) Ports A, C The total of all pins.  
-20
Low
level
output
current		 Peak
output
curren		 IOPL(1) P02-P07
Ports 1, 2, 3
Ports A, B, C
SI2P00-SI2P03
PWM0, PWM1		 For each pin.  
20
IOPL(2) P00, P01 For each pin.  
30
IOPL(3) Ports 7, 8 For each pin.  
5
Total
output
current		 IOAL(1) Ports 7 The total of all pins  
15
IOAL(2) Ports 8 The total of all pins  
15
IOAL(3) Port 1
PWM0, PWM1
Port 3
SI2P00-SI2P03		 The total of all pins  
50
IOAL(4) Ports 0, 2 The total of all pins.  
70
IOAL(5) Ports B The total of all pins  
40
IOAL(6) Ports A,C The total of all pins  
40
Maximum power
dissipation		 Pdmax QIP80E
SQFP80		 Ta=-30 to+70°C  
350
 mW
Operating
temperature
range		 Topr      
-30
70
Storage
temperature
range		 Tstg      
-55
125



Description

The LC875148A microcontroller is 8-bit single chip microcontroller with the following on-chip functional blocks:

   - CPU: Operable at a minimum bus cycle time of 100ns
   - 64K/48K/32K bytes ROM
   - 1024 byte RAM
   - two high performance 16 bit timer/counters (can be divided into 8 bit units)
   - two 8 bit timers with prescalers
   - timer for use as date/time clock
   - two synchronous serial I/O ports (with automatic block transmit/receive function)
   - one asynchronous/synchronous serial I/O port
   - 12-bit PWM × 2
   - 8-channel × 8-bit AD converter
   - high speed 8-bit parallel interface
   - 19-source 10-vectored interrupt system

All of the above functions are fabricated on a single chip.




Customers Who Bought This Item Also Bought

Margin,quality,low-cost products with low minimum orders. Secure your online payments with SeekIC Buyer Protection.
You may also be interested in :
Discrete Semiconductor Products
T508N12TOF
MUR20040
Relays
WIMA MKP4 0.22UF 630V
WIMA MKP4 4.7UF 630VDC
Programmers, Development Systems
ARDUINO IIC/I2C 液晶模块
JTAG-SMT2
Motors, Solenoids, Driver Boards/Modules
IHSS57-36-20
ASD-B2-1521-B
Circuit Protection
A50QS75-4Y
F-17*77
Audio Products
HUC1002
WM-64CT
View more